To view the poster program please click here

Wednesday (26.09.2018)

09:30
G: General Program Opening
MSE Opening

10:00
L: Plenary Lectures Plenary Lecture
Fatigue life assessment and microstructure optimization of structural materials by means of mechanism-based modelling of short crack growth

Prof. Dr. Hans-Jürgen Christ

10:30
Y: Breaks Time to change the room
Time to change the room
10:45
B05: Biomaterials Applications
B05.1: Bioactive, Antibacterial Surfaces and Coatings
Session starts at 10:45 Lecture
Smart Reinvention of Drug Delivery Systems with Graphene

Dr. Izabela Firkowska-Boden Dr. Matthias Arras Prof. Dr. Klaus D. Jandt Dr. Fuping Dong

C05: Small Scale and In Situ Mechanical Testing
C05.1: Fracture I
Session starts at 10:45 Keynote Lecture
Understanding the fracture toughness for brittle and ductile materials at the microscale

Dr. Steffen Brinckmann

C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.1: EBSD, TKD, PED-TEM, ECCI
Session starts at 10:45 Highlight Lecture
On the Assessment of Creep Damage Evolution in Nickel-Based Superalloys Through Correlative HR-EBSD and cECCI Studies

Sabin Sulzer Zhuangming Li Prof. Stefan Zaefferer Dr. Seyed Masood Hafez Haghighat Prof. Angus Wilkinson Prof. Dierk Raabe Prof. Roger Reed

C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.1: Session 1
Session starts at 10:45 Lecture
Computational and Experimental Assessment of the Mechanical Behavior of Ductile Cast Iron at a Microstructural Scale

Prof. Dr. Roberto Boeri Dr. Diego Fernandino Prof. Dr. Juan Miguel Massone

F01: High-Temperature Functional Materials
F01.1: Non-Metallic High-Temperature Materials
Session starts at 10:45 Keynote Lecture
Optical in-situ study of the redox processes in LiNbO3:Fe crystals

Ph.D. Dmytro Sugak Dr. Oleh Buryy Dr. Yuriy Suhak Dr. Yaroslav Zhydachevskyy Prof. Dr. Klaus-Dieter Becker Dr. Natalia Martynyuk Uliana Yakhnevych Prof. Dr. Sergii Ubizskii

F04: Mixed Ionic-Electronic Conductors: Novel Oxide Materials and Engineered Microstructures
F04.1: Session 1
Session starts at 10:45 Lecture
Synthesis and characterization of new composite ceramics based on gadolinium-doped ceria and magnesia nanoparticles

Jingying Yao Dr. Jens Zosel Dr. Wolfram Oelßner Prof. Dr. Michael Mertig

M03: Microstructure Evolution in Applied Materials: Process to Property
M03.1: Metals General
Session starts at 10:45 Lecture
How small Nb additions improve toughness in quenched and tempered high strength Cr-Mo steels

Dr.-Ing. Hongcai Wang Dr. Christoph Somsen Dr. Suzana G. Fries Dr. Yujiao Li Dr. Eric Detemple Prof. Dr. Gunther Eggeler

M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.1: Session 1
Session starts at 10:45 Keynote Lecture
Mesoscale Theory of Dislocations : from the Discrete to the Continuum

Dr. Alphonse Finel Dr. Pierre-Louis Valdenaire Dr. Yann Le Bouar Prof. Dr. Benoît Appolaire

P01: Manipulation of Matter by Electric and Magnetic Fields
P01.1: Session 1
Session starts at 10:45 Keynote Lecture
On the mixed conduction in yttria stabilized zirconia in high electric fields

Prof. Dr. Reiner Kirchheim

P02: Additive Manufacturing Technologies and Materials
P02.1: Applications
Session starts at 10:45 Keynote Lecture
Innovative Aerospace and Space Structures made by Additive Manufacturing

Prof. Dr. Christoph Leyens Prof. Dr. Frank Brückner Dr.-Ing. Elena Lopez Dipl.-Ing. André Seidel Mirko Riede

P04: Nanocomposites and Nanolaminated Functional Coatings
P04.1: Ternary Alloys and Nanolaminated Coatings
Session starts at 10:45 Keynote Lecture
Are nanostructured transition metal aluminium nitrides predictable? - Lessons learned from studying phase formation, elastic properties and fracture toughness

Prof. Jochen M. Schneider

P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.1: Fundamentals of Atomic Layer Processing
Session starts at 10:45 Keynote Lecture
ALD - Ideal2Real

Prof. Ola Nilsen Dr. Henrik Sønsteby

S05: Bulk Ultrafine- and Nano-Structured Materials
S05.1: Processing and Mechanical Properties
Session starts at 10:45 Keynote Lecture
Temperature and microstructure dependent mechanical properties of ultrafine-grained Chromium and Tungsten

Prof. Dr. Daniel Kiener Dr. Reinhard Fritz Dr. Alexander Leitner Dr. Verena Maier-Kiener

S06: Compositionally Complex Alloys – High Entropy Alloys
S06.1: Concerning the Cantor Alloy
Session starts at 10:45 Lecture
Characterization of high entropy alloy CrMnFeCoNi over a wide temperature range

Dipl.-Ing. Christian Gadelmeier Sebastian Haas Prof. Dr. Werner Skrotzki Mike Mosbacher Prof. Dr. Uwe Glatzel

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.1: Bulk Metallic Glasses and High-Entropy Alloys
Session starts at 10:45 Keynote Lecture
Recent Progress in Mechanical Properties of High-Entropy Alloys

Prof. Dr. Easo George

11:00
B05: Biomaterials Applications
B05.1: Bioactive, Antibacterial Surfaces and Coatings
Session starts at 10:45 Lecture
In vitro methods for the evaluation of antimicrobial surface designs

Dr. Jelmer Sjollema Dr. Bas A.J. Zaat Prof. Veronique Fontaine Prof. Madeleine Ramstedt Dr. Karin Thevissen Dr. Reto Luginbuehl Dr. Jiuyi Li Prof. Henny C. van der Mei Prof. Henk J. Busscher

C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.1: EBSD, TKD, PED-TEM, ECCI
Session starts at 10:45 Lecture
Defect Characterisation in MnAl-C Using EBSD and ECCI

Dr. Thomas George Woodcock Dr. Stefan Zaefferer

C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.1: Session 1
Session starts at 10:45 Lecture
Damage accumulation in a press-fit contact under mechanical loading

Prof. Dr. Angelika Brückner-Foit Christoph Skotarek Konstantin Markstädter Prof. Dr. Adrian Rienäcker

F04: Mixed Ionic-Electronic Conductors: Novel Oxide Materials and Engineered Microstructures
F04.1: Session 1
Session starts at 10:45 Lecture
Impact of a high surface area on the defect chemistry of mesoporous ceria

Dr. Matthias T. Elm Kathrin Michel Dr. Christian Reitz Dr. Torsten Brezesinski

M03: Microstructure Evolution in Applied Materials: Process to Property
M03.1: Metals General
Session starts at 10:45 Lecture
Improved data-driven predictive model of the tensile properties of thermo-mechanically-hot-rolled Nb-Ti-V-B micro-alloyed steels using artificial neural networks

Ali Hegazy Prof. Dr. M. Essam El-Dein El-Rafey Dr. Eman Fadl

S06: Compositionally Complex Alloys – High Entropy Alloys
S06.1: Concerning the Cantor Alloy
Session starts at 10:45 Lecture
Local texture in a swaged CrMnFeCoNi high-entropy alloy

Prof. Dr. Werner Skrotzki Aurimas Pukenas Prof. Dr. Guillaume Laplanche Prof. Dr. Easo George

11:15
B05: Biomaterials Applications
B05.1: Bioactive, Antibacterial Surfaces and Coatings
Session starts at 10:45 Lecture
Development and characterization of bioactive and antibacterial surfaces for bone contact applications

Dr.-Ing. Martina Cazzola Prof. Dr. Seiji Yamaguchi Dr. Sara Ferraris Dr. Marta Miola Dr. Andrea Cochis Prof. Dr. Lia Rimondini Prof. Dr. Silvia Spriano Prof. Dr. Enrica Vernè

C05: Small Scale and In Situ Mechanical Testing
C05.1: Fracture I
Session starts at 10:45 Lecture
Understanding elastic-plastic fracture at the micron scale by means of quantitative in-situ electron microscopy

Dipl.-Ing. Markus Alfreider Dr. Darjan Kozic Dr. Otmar Kolednik Dr. Daniel Kiener

C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.1: EBSD, TKD, PED-TEM, ECCI
Session starts at 10:45 Lecture
Advanced high-resolution 3D EBSD

Tobias Volkenandt Dr. Fabián Pérez-Willard Dr. Michael Rauscher

C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.1: Session 1
Session starts at 10:45 Lecture
Process-integrated residual stress induction on disc springs by means of incremental sheet metal forming technique

Ramin Hajavifard Fawad Maqbool Prof. Dr. Markus Bambach Prof. Dr. Frank Walther

F01: High-Temperature Functional Materials
F01.1: Non-Metallic High-Temperature Materials
Session starts at 10:45 Keynote Lecture
Challenges in melt growth of high melting point oxide single crystals

Dr. Steffen Ganschow Dr. Detlef Klimm

F04: Mixed Ionic-Electronic Conductors: Novel Oxide Materials and Engineered Microstructures
F04.1: Session 1
Session starts at 10:45 Lecture
Epitaxial Mesoporous Thin Films for Solid Oxide Fuel Cells Cathodes

Dr. Matias Acosta Dr. Federico Baiutti Dr. Albert Tarancón Prof. Dr. Judith L. MacManus-Driscoll

M03: Microstructure Evolution in Applied Materials: Process to Property
M03.1: Metals General
Session starts at 10:45 Lecture
Modelling the hot deformation behaviour of a Ti5553 alloy

Dipl.-Ing. Ricardo Henrique Buzolin Dr. Friedrich Krumphals Dr. Alfred Krumphals Dr. Martin Stockinger Dr. Sanjeev Kumar Prof. Dr. Cecilia Poletti

M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.1: Session 1
Session starts at 10:45 Lecture
Multiphase-field model for solid state phase transformation processes including inelastic effects

Daniel Schneider Ephraim Schoof Felix Schwab Christoph Herrmann Dr. Michael Selzer Prof. Dr. Britta Nestler

P01: Manipulation of Matter by Electric and Magnetic Fields
P01.1: Session 1
Session starts at 10:45 Highlight Lecture
Mechanisms of Flash Sintering and Related Phenomena

Prof. Rishi Raj

P02: Additive Manufacturing Technologies and Materials
P02.1: Applications
Session starts at 10:45 Highlight Lecture
Analysis and validation of a S-Band Helix Antenna Manufactured by Additive Manufacturing

Prof. Dr.-Ing. Fernando Lasagni Carlos Galleguillos Eduardo Lapeña Esteban Celemín

P04: Nanocomposites and Nanolaminated Functional Coatings
P04.1: Ternary Alloys and Nanolaminated Coatings
Session starts at 10:45 Highlight Lecture
Vacancies as a key mechanism for tuning thermodynamic stability and mechanical properties of nitride-based superlattices

Nikola Koutná Dr. David Holec Rainer Hahn Dr. Jakub Zálešák Dr. Martin Friák Prof. Dr. Mojmír Šob Prof. Dr. Jozef Keckes Prof. Dr. Paul H. Mayrhofer

P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.1: Fundamentals of Atomic Layer Processing
Session starts at 10:45 Highlight Lecture
Atomic-scale simulations of the mechanism of thermal atomic layer etch

Dr. Suresh Kondati Natarajan Dr. Simon D. Elliott

S05: Bulk Ultrafine- and Nano-Structured Materials
S05.1: Processing and Mechanical Properties
Session starts at 10:45 Lecture
Microstructural optimization of Ag/Nanodiamond composites through ball milling and high pressure torsion

Dipl.-Ing. Andreas Katzensteiner Prof. Dr. Reinhard Pippan Dr. Andrea Bachmaier

S06: Compositionally Complex Alloys – High Entropy Alloys
S06.1: Concerning the Cantor Alloy
Session starts at 10:45 Lecture
Peculiarities in the deformation of CoCrFeMnNi at very low temperatures

Dipl.-Ing. Aditya Srinivasan Tirunilai Dr. Alexander Kauffmann Dr. Jan Sas Dr. Klaus-Peter Weiss Hans Chen Dr. Dorothée Vinga Szabó Dr. Sabine Schlabach Dr. David Geissler Prof. Dr. Jens Freudenberger Prof. Dr. Martin Heilmaier

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.1: Bulk Metallic Glasses and High-Entropy Alloys
Session starts at 10:45 Lecture
Influence of annealing on microstructure and mechanical properties of a nanocrystalline CrCoNi medium-entropy alloy

Karoline Kormout Anton Hohenwarter Bernhard Völker Karoline Kormout Benjamin Schuh

11:30
B05: Biomaterials Applications
B05.1: Bioactive, Antibacterial Surfaces and Coatings
Session starts at 10:45 Lecture
Synergic antibacterial coatings combining titanium nanocolumns and tellurium nanorods

Dr. Jose Miguel Garcia-Martin Marcial Fernandez-Castro Dr. María Ujué González Prof. Thomas Webster William Tien-Street David Medina Dr. Ivan Fernandez

C05: Small Scale and In Situ Mechanical Testing
C05.1: Fracture I
Session starts at 10:45 Lecture
Quantitive in situ TEM/SEM Nano/Microscale Fracture Tests on Cr

Dr. Inas Issa Markus Alfreider Dr. Anton Hohenwarter Prof. Dr. Daniel Kiener

C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.1: EBSD, TKD, PED-TEM, ECCI
Session starts at 10:45 Highlight Lecture
Quantify GND density on cracking area using TKD

Dr. Yun Deng Prof. Afrooz Barnoush Jan Inge Hammer Meling

C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.1: Session 1
Session starts at 10:45 Lecture
Microstructural and fatigue assessment of thermal and mechanically aged austenitic AISI 347 power plant steel

Frankel Maci Michael Jamrozy Ruth Acosta Dr. Peter Starke Prof. Dr. Christian Boller Dr. Klaus Heckmann Dr. Jürgen Sievers Tim Schopf Prof. Dr. Frank Walther

F04: Mixed Ionic-Electronic Conductors: Novel Oxide Materials and Engineered Microstructures
F04.1: Session 1
Session starts at 10:45 Keynote Lecture
Surface reaction mechanisms and transport kinetics of perovskite mixed conducting oxide thin films

Dr. Markus Kubicek Dr. Edvinas Navickas Dr. Ghislain M. Rupp Dr. Andreas Nenning Dr. Alexander Opitz Prof. Herbert Hutter Prof. Jürgen Fleig

M03: Microstructure Evolution in Applied Materials: Process to Property
M03.1: Metals General
Session starts at 10:45 Lecture
A phase-field study of the influence of volume fraction and elastic inhomogeneity on the microstructure evolution of Ni-base superalloys

Oussama Boualy Prof. Hassan Mharzi Prof. Mustafa Benyoucef Prof. Yann Le Bouar

M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.1: Session 1
Session starts at 10:45 Lecture
Role of plasticity on the formation of acicular microstructures in metallic alloys

Prof. Benoit Appolaire Hocine Lebbad Prof. Dr. Yann Le Bouar Prof. Dr. Alphonse Finel

P01: Manipulation of Matter by Electric and Magnetic Fields
P01.1: Session 1
Session starts at 10:45 Lecture
Asymmetric temperature distribution during steady stage of flash sintering dense zirconia

Dr. Jinling Liu Guangxin Liu Dr. Dianguang Liu Dr. Yan Gao Prof. Dr. Linan An

P02: Additive Manufacturing Technologies and Materials
P02.1: Applications
Session starts at 10:45 Lecture
Development of a hybrid process chain for material-efficient production of aerospace components

Dr.-Ing. Margarita Bambach Prof. Dr. Sabine Weiß Prof. Dr. Markus Bambach

P04: Nanocomposites and Nanolaminated Functional Coatings
P04.1: Ternary Alloys and Nanolaminated Coatings
Session starts at 10:45 Lecture
Study on the CrN/AlN multi-layered coatings using spherical aberration corrected TEM

Dr. Zaoli Zhang

P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.1: Fundamentals of Atomic Layer Processing
Session starts at 10:45 Highlight Lecture
Understanding the growth of multi-layered titania and alumina systems in atomic layer deposition

Dr. Robert Zierold Christoph Wiegand René Faust Alexander Meinhardt Prof. Dr. Robert Blick Prof. Dr. Kornelius Nielsch

S05: Bulk Ultrafine- and Nano-Structured Materials
S05.1: Processing and Mechanical Properties
Session starts at 10:45 Lecture
Effect of Equal Channel Angular Pressing on Mechanical and In-Service Properties of Mg-1%Zn-0.3%Ca Alloy

Natalia Martynenko Dr. Elena Lukyanova Dr. Vladimir Serebryany Dr. Dmitry Prosvirnin Prof. Dr. Vladimir Terentiev Prof. Dr. Georgy Raab Prof. Dr. Sergey Dobatkin Prof. Yuri Estrin

S06: Compositionally Complex Alloys – High Entropy Alloys
S06.1: Concerning the Cantor Alloy
Session starts at 10:45 Lecture
Additive Manufacturing of CoCrFeMnNi Cantor alloy: Influence of the synthesis route on structure and properties

Dr. Jörg Kaspar Dr. Liliana Kotte Dr. Junhee Han Martin Kuczyk Sören Thieme Dr. Denis Beitelschmidt Prof. Dr. Martina Zimmermann Prof. Dr. Cristoph Leyens

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.1: Bulk Metallic Glasses and High-Entropy Alloys
Session starts at 10:45 Lecture
Fracture toughness testing of Bulk Metallic Glass - a discussion on sample size effects and new insights on Stress Corrosion Cracking of Zr52.5Cu17.9Ni14.6Al10Ti5

Dr.-Ing. David Geißler Dr. Horst Wendrock Prof. Dr. Jens Freudenberger Prof. Dr. Martina Zimmermann Dr. Annett Gebert

11:45
B05: Biomaterials Applications
B05.1: Bioactive, Antibacterial Surfaces and Coatings
Session starts at 10:45 Keynote Lecture
Controlling Protein Adsorption through Nanostructured Polymeric Surfaces

Dr. Izabela Firkowska-Boden Xiaoyuan Zhang Christian Helbing Prof. Dr. Klaus D. Jandt

C05: Small Scale and In Situ Mechanical Testing
C05.1: Fracture I
Session starts at 10:45 Lecture
Influence of pre-deformation on the microscale fracture toughness of bcc-materials

Stefan Gabel Prof. Dr. Mathias Göken Dr. Benoit Merle

C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.1: EBSD, TKD, PED-TEM, ECCI
Session starts at 10:45 Lecture
Comparison of the Current Methods of Parent Austenite Reconstruction from Martensite Orientation Maps

Dr. Tuomo Nyyssönen Dr. Matti Isakov Prof. Veli-Tapani Kuokkala Prof. Pasi Peura

C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.1: Session 1
Session starts at 10:45 Lecture
Characterization of the microstructure morphology in different phase states of metastable austenitic stainless steel AISI 347

Tobias Daniel Dr. Marek Smaga Prof. Dr. Tilmann Beck

F01: High-Temperature Functional Materials
F01.1: Non-Metallic High-Temperature Materials
Session starts at 10:45 Lecture
Nanocomposite solid ion conductor: SPEEK polymer in TiO2 or ZrO2 nanotube arrays

Prof. Philippe Knauth Dr. Olim Ruzimuradov

M03: Microstructure Evolution in Applied Materials: Process to Property
M03.1: Metals General
Session starts at 10:45 Lecture
Phase-field simulation of the anisotropic microstructure evolution during directional solidification in the eutectic NiAl-9Mo system

Kaveh Dargahi Noubary Michael Kellner Dr. Johannes Hötzer Prof. Dr. Britta Nestler

M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.1: Session 1
Session starts at 10:45 Highlight Lecture
Modeling of dissipative processes during dynamic loading of shape memory alloys

Dr. Frank Wendler Shahabeddin Ahmadi Kiran Jacob Prof. Dr. Manfred Kohl

P01: Manipulation of Matter by Electric and Magnetic Fields
P01.1: Session 1
Session starts at 10:45 Lecture
Generation of Frenkel Defects above the Debye Temperature by Proliferation of Phonons near the Brillouin Zone Edge

Malte Jongmanns Prof. Dr. Rishi Raj Prof. Dr. Dietrich E. Wolf

P02: Additive Manufacturing Technologies and Materials
P02.1: Applications
Session starts at 10:45 Lecture
Development of optimized Umbilical Connector Bracket for Powder Bed Laser Fusion

Prof. Dr.-Ing. Fernando Lasagni Jorge Vilanova Marta Garcia-Cosío Carlos Galleguillos Antonio Periñán Miguel Angel Alen

P04: Nanocomposites and Nanolaminated Functional Coatings
P04.1: Ternary Alloys and Nanolaminated Coatings
Session starts at 10:45 Highlight Lecture
Toughness Enhancement in Superlattice TiN/WN Coatings

Julian Buchinger Nikola Koutná Prof. Paul Heinz Mayrhofer Dr. David Holec Dr. Matthias Bartosik

P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.1: Fundamentals of Atomic Layer Processing
Session starts at 10:45 Lecture
HfO2 interface formation by thermal and plasma assisted ALD oxide growth on Hf metal

Stephan Aussen Alexander Hardtdegen Dr. Alexander Meledin Prof. Regina Dittmann Dr. Susanne Hoffmann-Eifert

S05: Bulk Ultrafine- and Nano-Structured Materials
S05.1: Processing and Mechanical Properties
Session starts at 10:45 Lecture
On the effect of equal-channel angular pressing on the mechanical properties and microstructural evolution of 18 kt gold

Sebastian Fritsch Cagatay Elibol Philipp Frint Martin F.-X. Wagner

S06: Compositionally Complex Alloys – High Entropy Alloys
S06.1: Concerning the Cantor Alloy
Session starts at 10:45 Lecture
Deformation mechanisms and of two different high-entropy alloys: bcc NbMoCrTiAl vs. fcc CoCrFeMnNi

Ph.D. In-Chul Choi Prof. Dr. Zhaoping Lu Dr. Dong-Hyun Lee Prof. Dr. Jae-il Jang Dr. Hans Chen Dr. Alexander Kauffmann Prof. Dr. Martin Heilmaier Dr. Christian Brandl Dr. Ruth Schwaiger

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.1: Bulk Metallic Glasses and High-Entropy Alloys
Session starts at 10:45 Lecture
Mechanical properties of bulk metallic glass composites

Lisa Krämer Verena Maier-Kiener Karoline S. Kormout Yannick Champion Reinhard Pippan

12:00
C05: Small Scale and In Situ Mechanical Testing
C05.1: Fracture I
Session starts at 10:45 Lecture
In-situ study of a crack initiation mechanism in the aluminum alloy 7475-T7351

Prof. Dr. Miroslav Piska Dr. Petra OHNISTOVA Dr. Jiri Dluhos Dr. Martin PETRENEC

C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.1: EBSD, TKD, PED-TEM, ECCI
Session starts at 10:45 Oral Poster
Development of oxide scales in low carbon steel wire rods

Prof. Dr. Martina Cecilia Avalos Prof. Dr. Elena Brandaleze Mariela Melia Prof. Dr. Raul Bolmaro

C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.1: Session 1
Session starts at 10:45 Lecture
A nano-tomographic study of the filling of grain boundary cavities formed during creep loading of Fe-Au, Fe-Mo and Fe-W alloys

Ph.D. Haixing Fang Nikodem Szymanski Casper Versteylen Prof. Dr. Ekkes Brück Dr. Peter Cloetens Prof. Dr. Sybrand van der Zwaag Dr. Niels van Dijk

F01: High-Temperature Functional Materials
F01.1: Non-Metallic High-Temperature Materials
Session starts at 10:45 Lecture
High-Temperature Electrical Conductivity and Resonant Piezoelectric Properties of Bulk Single-Crystalline Aluminum Nitride

Dr. Iurii Kogut Ivan Gamov Dr. Carsten Hartmann Dr. Klaus Irmscher Prof. Dr. Matthias Bickermann Prof. Dr. Holger Fritze

M03: Microstructure Evolution in Applied Materials: Process to Property
M03.1: Metals General
Session starts at 10:45 Lecture
Analysing the influence of neighbours on the spheroidization of finite 3-dimensional rods in a lamellar arrangement: Phase-field simulations

Tobias Mittnacht Dr. Daniel Schneider Prince Gideon Kubendran Amos Prof. Dr. Britta Nestler

M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.1: Session 1
Session starts at 10:45 Lecture
Pore Annihilation in Nickel-base Superalloys During Hot Isostatic Pressing: A phase field modeling

Dr.-Ing. Yann Le Bouar Dr. Antoine Ruffini Dr. Alphonse Finel

P02: Additive Manufacturing Technologies and Materials
P02.1: Applications
Session starts at 10:45 Lecture
Additive Manufactured TiTa Alloys for Biomedical Applications

Erin Brodie Dr. Jess Frith Dr. Andrey Molotnikov

P04: Nanocomposites and Nanolaminated Functional Coatings
P04.1: Ternary Alloys and Nanolaminated Coatings
Session starts at 10:45 Lecture
Magnetron-sputtered Al-containing MAX phase carbide thin films and their application as oxidation-resistant coatings

Ph.D. Chongchong Tang Dr. Martin Steinbrueck Steinbrueck Mirco Grosse Dr. Sven Ulrich Dr. Michael Stueber Prof. Dr. Hans Seifert

P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.1: Fundamentals of Atomic Layer Processing
Session starts at 10:45 Lecture
Atomic Layer Deposition: from molecular chemistry to nanocoatings

Ph.D. Pengmei Yu Dr. Mehtap Buyukyazi Christoph Bohr Dr. Mateusz Scigaj Prof. Dr. Sanjay Mathur Dr. Mariona Coll

S05: Bulk Ultrafine- and Nano-Structured Materials
S05.1: Processing and Mechanical Properties
Session starts at 10:45 Lecture
Properties of iron after large and severe plastic deformation – Application potential for precursors to ultrafine grained microstructures

Dr. Enrico Bruder

S06: Compositionally Complex Alloys – High Entropy Alloys
S06.1: Concerning the Cantor Alloy
Session starts at 10:45 Lecture
Influence of microstructure and testing temperature on the thermally activated deformation behavior of the CrMnFeCoNi high-entropy alloy

Dr. Verena Maier-Kiener Benjamin Schuh Prof. Dr. Helmut Clemens Dr. Anton Hohenwarter

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.1: Bulk Metallic Glasses and High-Entropy Alloys
Session starts at 10:45 Lecture
Influence of the processing route on the deformation behavior of metallic nanoglasses

Dr. Omar Adjaoud Prof. Dr. Karsten Albe

12:03
C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.1: EBSD, TKD, PED-TEM, ECCI
Session starts at 10:45 Oral Poster
Electron Back-Scatter Diffraction Studies of the Microstructure of a Cold Rolled Interstitial Free Steel Guided by Synchrotron X-Ray Diffraction

Prof. Dr. Raúl Bolmaro Emanuel Benatti Dr. Natalia De Vincentis Dr. Martina Avalos Prof. Dr. Heinz-Gunter Brokmeier Dr. Norbert Schell

12:15
Y: Breaks Lunch Break
Lunch Break
13:45
L: Plenary Lectures Plenary Lecture
The multifaceted roles of machine intelligence in materials science and engineering

Prof. Elizabeth A. Holm

14:15
Y: Breaks Time to change the room
Time to change the room
14:30
B05: Biomaterials Applications
B05.2: Scaffolds and Nanomaterials for Tissue Engineering
Session starts at 14:30 Lecture
Anti-microbial alginate gels with improved stability as a cell scaffold and wound dressing material

Dr. Patrick van Rijn

C05: Small Scale and In Situ Mechanical Testing
C05.2: In-Situ Small Scale Testing
Session starts at 14:30 Highlight Lecture
Anisotropic static and cyclic mechanical properties in nanolayered pearlitic steels

Dr. Marlene Kapp Dr. Oliver Renk Prof. Dr. Reinhard Pippan

C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography
Session starts at 14:30 Highlight Lecture
Automated calibration of the atom probe tomography reconstructions with electron microscopy

Shyam Katnagallu Dr. Surendra Makineni Dr. Oana Cojocaru-Mirédin Dr. Torsten Schwarz Prof. Dierk Raabe Dr. Baptiste Gault Dr. Isabelle Mouton

C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.2: Session 2
Session starts at 14:30 Keynote Lecture
Strain localizations during cyclic deformation investigated by high-resolution digital image correlation

Dr.-Ing. Anja Weidner Prof. Horst Biermann

F01: High-Temperature Functional Materials
F01.2: High-Temperature Sensor Materials
Session starts at 14:30 Keynote Lecture
Sensor Systems for Additive Manufacturing

Prof. Dr. Jürgen Hartmann Kevin Knopp Philipp Lenski Marc Zänglein Dr. Jochen Manara Thomas Stark Matthias Zipf Mariacarla Arduini Ekkehard Schreiber Dr. Udo Krüger Prof. Dr. Franz Schmidt Dr. Martin Brunner

F04: Mixed Ionic-Electronic Conductors: Novel Oxide Materials and Engineered Microstructures
F04.2: Session 2
Session starts at 14:30 Lecture
High vortex activation energies in the AC magnetic response of superconducting films and coatings close to the DC irreversibility line

Lucica Miu

M03: Microstructure Evolution in Applied Materials: Process to Property
M03.2: Chemo-Mechanical Coupling in Metals
Session starts at 14:30 Lecture
Bainitic transformation for press hardening applications: A multiscale FE-MPF coupled approach

Mingxuan Lin Dr. Diego Said Schicchi Dr. Martin Hunkel Prof. Dr. Ulrich Prahl

P01: Manipulation of Matter by Electric and Magnetic Fields
P01.2: Session 2
Session starts at 14:30 Highlight Lecture
Field-assisted/flash sintering and related mass transport phenomena in oxide ceramics

Dr. Hidehiro Yoshida Yamato Sasaki Prof. Takahisa Yamamoto

P02: Additive Manufacturing Technologies and Materials
P02.2: Materials Processing and Characterization
Session starts at 14:30 Keynote Lecture
Tailoring titanium alloys to additive manufacturing

Dr. Pere Barriobero Vila Dr. Joachim Gussone Dr. Jan Haubrich Dr. Andreas Stark Dr. Norbert Schell Prof. Dr. Guillermo Requena

P04: Nanocomposites and Nanolaminated Functional Coatings
P04.2: Microstructural Design and Nanocomposite Thin Films
Session starts at 14:30 Keynote Lecture
Towards nanostructured materials with enhanced mechanical properties by dedicated microstructural design

Prof. Dr. Rostislav Daniel Prof. Dr. Christian Mitterer Prof. Dr. Jozef Keckes

P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.2: Nanocoatings for Microelectronics, Energy Conversion and Storage
Session starts at 14:30 Highlight Lecture
Advanced in Atomic Layer Deposition Techniques: Electrocatalyst for Hydrogen Evolution and Charge Transporting Layer for Perovskite Solar Cells

Prof. Dr. Hyunjung Shin

S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms
Session starts at 14:30 Lecture
Abnormal grain growth mediated by fractal boundary migration at the nanoscale

Dr. Christian Braun Raphael Zeller Hanadi Menzel Nils Boussard Jörg Schmauch Prof. Carl E. Krill III Prof. Dr. Rainer Birringer

S06: Compositionally Complex Alloys – High Entropy Alloys
S06.2: Basics and Overviews
Session starts at 14:30 Keynote Lecture
Effect of grain size, temperature and texture on mechanical properties of the CrCoNi medium-entropy alloy

Mike Schneider Tanguy Manesau Prof. Dr. Guillaume Laplanche Prof. Dr. Gunther Eggeler Prof. Dr. Easo George

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.2: Nanostructured Materials and High-Entropy Alloys
Session starts at 14:30 Keynote Lecture
Microstructure, texture and strength evolution during severe plastic deformation of CrMnFeCoNi high-entropy alloy

Prof. Dr. Werner Skrotzki Aurimas Pukenas Bertalan Joni Eva Odor Prof. Dr. Tamas Ungar Dr. Anton Hohenwarter Prof. Dr. Reinhard Pippan Prof. Dr. Easo George

14:45
B05: Biomaterials Applications
B05.2: Scaffolds and Nanomaterials for Tissue Engineering
Session starts at 14:30 Lecture
New Ways in Nanomedicine Based on Biocompatible Porous Silicon Nanostructures

Dr. Vladimir Sivakov Dr. Liubov Osminkina

C05: Small Scale and In Situ Mechanical Testing
C05.2: In-Situ Small Scale Testing
Session starts at 14:30 Lecture
Local Fatigue Testing by Dynamic Micropillar Compression of ARB Processed Bimodal Copper Sheets

Sebastian Krauß Prof. Dr. Mathias Göken Dr. Benoit Merle

C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography
Session starts at 14:30 Lecture
Correlative high-resolution characterization of strengthening effects in the Ni-based superalloy Inconel 718

Felix Theska Prof. Simon P. Ringer Dr. Sophie Primig

F04: Mixed Ionic-Electronic Conductors: Novel Oxide Materials and Engineered Microstructures
F04.2: Session 2
Session starts at 14:30 Lecture
Quench behavior of high-temperature superconductor tapes for power applications

Nicolo Riva Prof. Dr. Francesco Grilli Prof. Dr. Frédéric Sirois Dr. Bertrand Dutoit Dr. Christian Lacroix Simon Richard

M03: Microstructure Evolution in Applied Materials: Process to Property
M03.2: Chemo-Mechanical Coupling in Metals
Session starts at 14:30 Lecture
A Microstructure-Based Thermodynamically Consistent Model for the Thermomechanical Processing of Metallic Materials

Lukas Kertsch Dr. Dirk Helm

M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.2: Session 2
Session starts at 14:30 Lecture
Grain size and toughness: Elucidating the contradicting role of grain boundaries

Dr. Jens Reiser Prof. Dr. Alexander Hartmaier

P01: Manipulation of Matter by Electric and Magnetic Fields
P01.2: Session 2
Session starts at 14:30 Lecture
A technique for obtaining uniform microstructure in flash-sintered oxide ceramics

Prof. Takahisa Yamamoto Prof. Tomoharu Tokunaga Prof. Dr. Hidehiro Yoshida

P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.2: Nanocoatings for Microelectronics, Energy Conversion and Storage
Session starts at 14:30 Highlight Lecture
Turning lead into gold: Inexpensive materials and accurate nanostructuring in energy conversion

Prof. Julien Bachmann

S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms
Session starts at 14:30 Lecture
Influence of processing conditions on the defect structure in nanostructured materials

Prof. Dr. Jeno Gubicza

15:00
B05: Biomaterials Applications
B05.2: Scaffolds and Nanomaterials for Tissue Engineering
Session starts at 14:30 Lecture
Initial study on 3D printing of piezoelectric barium titanate ceramics for bone tissue engineering

Christian Polley Thomas Distler David Rüffer Dr. Rainer Detsch Prof. Dr. Aldo R. Boccaccini Prof. Dr. Hermann Seitz

C05: Small Scale and In Situ Mechanical Testing
C05.2: In-Situ Small Scale Testing
Session starts at 14:30 Lecture
Dynamic compression testing of silicon micropillars

Dr. Rajaprakash Ramachandramoorthy Dr. Laszlo Petho Dr. Johann Michler Dr. Jakob Schwiedrzik Dr. Gaurav Mohanty

C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography
Session starts at 14:30 Lecture
Electromagnetic field measurements of needle-shaped specimens

Fengshan Zheng Dr. Vadim Migunov Dr. Jan Caron Prof. Dr. Giulio Pozzi Prof. Dr. Rafal E Dunin-Borkowski

C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.2: Session 2
Session starts at 14:30 Lecture
Local deformation behavior of Al-matrix-composites by in situ testing and advanced mathematical image correlation

Alexandra Pokhlestova Sebastian Schuff Prof. Dr. Frank Balle Prof. Dr. Tilmann Beck Dr. Jan Henrik Fitschen Prof. Dr. Gabriele Steidl

F01: High-Temperature Functional Materials
F01.2: High-Temperature Sensor Materials
Session starts at 14:30 Lecture
Studies on the interaction of indium tin oxide with carbon monoxide and additional gas species

Stefan Dietrich Dr. Mihails Kusnezoff Dr. Nikolai Trofimenko Dr. Uwe Petasch

F04: Mixed Ionic-Electronic Conductors: Novel Oxide Materials and Engineered Microstructures
F04.2: Session 2
Session starts at 14:30 Lecture
The lightest superconducting wire based on Mg, Ti and Al

Dr. Pavol Kovac Imrich Hušek Tibor Melišek Lubomir Kopera Dr. Miloslav Kulich Dr. Jan Kováč

M03: Microstructure Evolution in Applied Materials: Process to Property
M03.2: Chemo-Mechanical Coupling in Metals
Session starts at 14:30 Lecture
Chemo-mechanical multiphase-field model: Application to phase transformation processes during the heat treatment of steel

Ephraim Schoof PG Kubendran Amos Dr. Daniel Schneider Prof. Dr. Britta Nestler

M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.2: Session 2
Session starts at 14:30 Lecture
Dislocation Evolution Model of Nano Indentation in connection with Hydrogen Embrittlement

Jan Inge Meling Prof. Dr. Afrooz Barnoush

P01: Manipulation of Matter by Electric and Magnetic Fields
P01.2: Session 2
Session starts at 14:30 Lecture
Flash Sintering of Boron-Containing Ceramics

Aubrey Fry Dr. Selva Vennila Raju Dr. Victoria Blair Dr. W. Taylor Shoulders Dr. Raymond Brennan Dr. Lionel Vargas-Gonzalez

P02: Additive Manufacturing Technologies and Materials
P02.2: Materials Processing and Characterization
Session starts at 14:30 Lecture
Process Parameters for Selective Laser Melting of Duplex Stainless Steel

Marc Huber Matthias Fankhauser Martin Hartmann Thomas Kränzler Robin Rettberg Prof. Dr. Kaspar Löffel

P04: Nanocomposites and Nanolaminated Functional Coatings
P04.2: Microstructural Design and Nanocomposite Thin Films
Session starts at 14:30 Lecture
Solid solution hardened (Ti1-x,Zrx)C1-y:H and carbon-based nanocomposites in the system Ti-Zr-C-H deposited by high power impulse magnetron sputtering

Christian Poltorak Dr. Harald Leiste Dr. Monika Rinke Dr. Sven Ulrich

P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.2: Nanocoatings for Microelectronics, Energy Conversion and Storage
Session starts at 14:30 Highlight Lecture
Spatial Atmospheric ALD: a scalable technique for the deposition of Zinc Oxysulfide Buffer Layers for CIGS Solar Cells

Dr. Fieke van den Bruele Dr. Andrea Illiberi Dr. Paul Poodt Dr. Pieter Jan Bolt Corné Frijters

S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms
Session starts at 14:30 Lecture
Synchronised in-situ X-ray diffraction and strain measurement during deformation of nanocrystalline PdAu

Michael Johannes Deckarm Andreas Leibner Marta Majkut Vadim Dyadkin Rainer Birringer

S06: Compositionally Complex Alloys – High Entropy Alloys
S06.2: Basics and Overviews
Session starts at 14:30 Lecture
On the growth of single-phase single-crystalline fcc and bcc High-Entropy Alloys

Tim Lienig Dr. Michael Feuerbacher Carsten Thomas Eva Würtz

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.2: Nanostructured Materials and High-Entropy Alloys
Session starts at 14:30 Lecture
Deformation-induced supersaturation in the immiscible Cu-Ag system

Karoline Kormout Stefan Zeiler Prof. Reinhard Pippan

15:15
B05: Biomaterials Applications
B05.2: Scaffolds and Nanomaterials for Tissue Engineering
Session starts at 14:30 Lecture
Drug-loaded polymer-based matrices manufactured by electrohydrodynamic processes

Prof. Dr. Gustavo Abraham Dr. Guadalupe Rivero

C05: Small Scale and In Situ Mechanical Testing
C05.2: In-Situ Small Scale Testing
Session starts at 14:30 Lecture
Nano-compression Superelastic Behaviour in Cu-Al-Be Shape Memory Alloy Micro/nano Pillars

Ph.D. Valeria Fuster Dr. Jose F. Gómez-Cortés Dr. Iñaki López-Ferreño Prof. Dr. Maria L. Nó Prof. Dr. Jose Maria San Juan

C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography
Session starts at 14:30 Highlight Lecture
Long-range ordered nanoscale domains in an Fe-Co-Mo Maraging steel, an atom probe microscopy and neutron diffraction study

Dr. Sophie Primig Felix Theska Dr. Christoph Turk Dr. Anna Ceguerra Prof. Simon Ringer

C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.2: Session 2
Session starts at 14:30 Lecture
On the deformation behavior of Mg bicrystal with 90° 〈10-10〉 symmetric tilt boundary during plane strain compression

Marcel Schreiber Dr. Talal Al-Samman Prof. Dr. Sandra Korte-Kerzel Prof. Dr. Dmitri A. Molodov

F01: High-Temperature Functional Materials
F01.2: High-Temperature Sensor Materials
Session starts at 14:30 Lecture
Hydrogen Sensing in Harsh Environments: Mechanisms and Cross-Sensitivities for the Photonic Bandgap Shift of Tungsten Oxide Inverse Opals

Sabrina Amrehn Dr. Xia Wu Dr. Thorsten Wagner

F04: Mixed Ionic-Electronic Conductors: Novel Oxide Materials and Engineered Microstructures
F04.2: Session 2
Session starts at 14:30 Lecture
Properties and improvements of commercial HTS wires using an e-beam PVD process

Dr. Markus Bauer Dr. Veit Große Timo Koenen Dr. Sandra Kauffmann-Weiß Dr. Jens Hänisch

M03: Microstructure Evolution in Applied Materials: Process to Property
M03.2: Chemo-Mechanical Coupling in Metals
Session starts at 14:30 Lecture
Growth and ripening behavior of γ''-precipitation in Nickel-base superalloys during heat treatment

Yueh-Yu Lin Felix Schleifer Dr. Michael Fleck Prof. Dr. Uwe Glatzel

M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.2: Session 2
Session starts at 14:30 Lecture
Microstructure, creep and strain partitioning of Mg-Al-Ca alloys

Muhammad Zubair Dr. Stefanie Sandloebes James Gibson Prof. Dr. Sandra Korte-Kerzel

P01: Manipulation of Matter by Electric and Magnetic Fields
P01.2: Session 2
Session starts at 14:30 Lecture
Electrical field assisted sintering of polycrystalline Yttrium doped Ceria investigated by Sinter-forging

Chen Cao Dr. Robert Mücke Prof. Olivier Guillon

P02: Additive Manufacturing Technologies and Materials
P02.2: Materials Processing and Characterization
Session starts at 14:30 Lecture
Influence of the chemical composition and building direction on the fatigue behavior of additively manufactured 316L

Dipl.-Ing. Bastian Blinn Dr. Marcus Klein Prof. Dr. Tilmann Beck

P04: Nanocomposites and Nanolaminated Functional Coatings
P04.2: Microstructural Design and Nanocomposite Thin Films
Session starts at 14:30 Highlight Lecture
Mechanical properties of tough nanocomposites: a computational study by molecular dynamics

Dr. Diego Martinez-Martinez Prof. Dr. Olalla Faza

P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.2: Nanocoatings for Microelectronics, Energy Conversion and Storage
Session starts at 14:30 Highlight Lecture
Recent advances in Atomic Layer Processing of materials for emerging microelectronic device fabrication

Prof. Dr. Marceline Bonvalot Samia Belahcen Vincent Pesce Dr. Rémy Gassilloud Prof. Dr. Patrice Gonon Ahmad Bsiesy Prof. Dr. Christphe Vallée Dr. Ahmad Chaker

S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms
Session starts at 14:30 Highlight Lecture
Observation of Grain Boundary Sliding in an Ultrafine Grained Ferrite Steel

Laura Ahmels Dr. Enrico Bruder

S06: Compositionally Complex Alloys – High Entropy Alloys
S06.2: Basics and Overviews
Session starts at 14:30 Lecture
Combining Thermodynamic Modeling and Additive Manufacturing for High-Throughput Screening of Compositionally Complex Alloys

Fabian Kies Dr. Bengt Hallstedt Dr. Christian Haase

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.2: Nanostructured Materials and High-Entropy Alloys
Session starts at 14:30 Lecture
A comparative study on oxygen effect in nanocrystalline alloys

Dr. Jinming Guo Dr. Zaoli Zhang

15:30
B05: Biomaterials Applications
B05.2: Scaffolds and Nanomaterials for Tissue Engineering
Session starts at 14:30 Lecture
The ESA effect as possible quantification method in nanoparticle modification

Alexander Renner Markus Schütz Daniel Moog Dr. Thomas Fischer Prof. Dr. Sanjay Mathur

C05: Small Scale and In Situ Mechanical Testing
C05.2: In-Situ Small Scale Testing
Session starts at 14:30 Lecture
In-situ study of recrystallization and deformation processes in non-toxic free cutting steel

Jirí Dluhoš Tomáš Babinský Antoine Candeias Dr. Martin Petrenec

C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography
Session starts at 14:30 Lecture
Correlative electron microscopy and atom probe tomography investigations on solute segregations to planar faults in crept Co based superalloys

Dr. Surendra Kumar Makineni Dr. Junyang He Malte Lenz Prof. Erdmann Spiecker Prof. Dierk Raabe Dr. Baptiste Gault Ankit Kumar

C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.2: Session 2
Session starts at 14:30 Lecture
Experimental Characterization of Crack Initiation in High Performance Steels for the Development and the Benchmarking of Material Models for the Fatigue Life Prediction

Ali Riza Durmaz Michael Buck Prof. Dr. Christoph Eberl Dr. Thomas Straub

F01: High-Temperature Functional Materials
F01.2: High-Temperature Sensor Materials
Session starts at 14:30 Lecture
Feasibility of Cr- and Co-TiO2 for High-Temperature Gas Sensor Applications

Dr. Bilge Saruhan-Brings Dr. Roussin Lontio Fomekong

F04: Mixed Ionic-Electronic Conductors: Novel Oxide Materials and Engineered Microstructures
F04.2: Session 2
Session starts at 14:30 Highlight Lecture
High Quality Epitaxial NdFeAs(O,F) Films By Molecular Beam Epitaxy: Influence Of Film Thickness On Transport Properties

Dr. Sandra Kauffmann-Weiss Prof. Kazumasa Iida Takuya Matsumoto Taito Ohmura Dr. Takafumi Hatano Dr. Torben Boll Marco Langer Sven Meyer Dr. Chiara Tarantini Dr. Jan Jaroszynski Dr. Reinhard Schneider Prof. Bernhard Holzapfel Prof. Hiroshi Ikuta Dr. Jens Hänisch

M03: Microstructure Evolution in Applied Materials: Process to Property
M03.2: Chemo-Mechanical Coupling in Metals
Session starts at 14:30 Highlight Lecture
A Sharp Interface Phase Field Method

Dr. Alphonse Finel Dr. Yann Le Bouar

M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.2: Session 2
Session starts at 14:30 Lecture
Plastic irreversibility in cyclic loading with strain gradients

Dr.-Ing. Markus Stricker Dr. Daniel Weygand Prof. Dr. Peter Gumbsch

P01: Manipulation of Matter by Electric and Magnetic Fields
P01.2: Session 2
Session starts at 14:30 Lecture
Electric field assisted sintering of polycrystal ceria inside a transmission electron microscope

Zheng Ma Dr. Lei Jin Dr. Vadim Migunov Chen Cao Dr. Robert Mücke Prof. Dr. Rafal Dunin-Borkowski Prof. Dr. Olivier Guillon

P02: Additive Manufacturing Technologies and Materials
P02.2: Materials Processing and Characterization
Session starts at 14:30 Lecture
Selective laser melting of surface inoculated metal powders

Dr. Kay-Peter Hoyer Florian Hengsbach Madison Burns Markus Voigt Prof. Dr. Guido Grundmeier Dr. Evgeny Zhuravlev Prof. Dr. Olaf Kessler Prof. Dr. Mirko Schaper Dipl.-Ing. Lennart Tasche

P04: Nanocomposites and Nanolaminated Functional Coatings
P04.2: Microstructural Design and Nanocomposite Thin Films
Session starts at 14:30 Lecture
Self-structuring in Zr1-xAlxN nanocomposites films: a material system with diverse structures

Dr. Naureen Ghafoor Prof. Ivan Petrov Dr. David Holec Dr. Grzegorz Greczynski Dr. Jens Jensen Prof. Per Persson Prof. Lars Hultman Prof. Jens Birch

P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.2: Nanocoatings for Microelectronics, Energy Conversion and Storage
Session starts at 14:30 Highlight Lecture
Challenges and Opportunities for Atomic Layer Deposition of Two-Dimensional Materials in Nanoelectronic Applications

Benjamin Groven Dr. Yoann Tomczak Haodong Zhang Ankit Nalin Mehta Dr. Hugo Bender Dr. Tom Schram Dr. Quentin Smets Prof. Dr. Wilfried Vandervorst Prof. Dr. Marc Heyns Dr. Matty Caymax Dr. Iuliana Radu Prof. Dr. Annelies Delabie

S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms
Session starts at 14:30 Lecture
Effect of PLC band formation on the formability of a particle reinforced AA2017 alloy during Equal-Channel Angular Pressing

Christian Illgen Dr. Markus Härtel Dr. Philipp Frint Prof. Dr. Martin F.-X. Wagner

S06: Compositionally Complex Alloys – High Entropy Alloys
S06.2: Basics and Overviews
Session starts at 14:30 Lecture
Grain Boundary Mobility in the High Entropy Alloys - Insights from Atomistic Computer Simulations

Daniel Utt Dr. Alexander Stukowski Prof. Dr. Karsten Albe

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.2: Nanostructured Materials and High-Entropy Alloys
Session starts at 14:30 Highlight Lecture
What can be learned about SPD metals from dilatometry and what can be learned about defect physics from SPD metals

Prof. Dr. Roland Würschum

15:45
B05: Biomaterials Applications
B05.2: Scaffolds and Nanomaterials for Tissue Engineering
Session starts at 14:30 Lecture
Novel Multifunctional Nanocomposite Scaffolds As Matrices for Drug Delivery and Bone Tissue Engineering

Prof. Dr. Aldo R. Boccaccini Dr. Juan Pablo Cattalini Rodrigo Vidotto Prof. Dr. Viviana Mouriño

C05: Small Scale and In Situ Mechanical Testing
C05.2: In-Situ Small Scale Testing
Session starts at 14:30 Lecture
Hydrogen embrittlement in nickel-based superalloys

Dipl.-Ing. Anna Ebner Dr. Steffen Brinckmann Dr. Helmut Clemens Dr. Reinhard Pippan Dr. Verena Maier-Kiener

C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography
Session starts at 14:30 Oral Poster
Oxygen deficiency evolution in defect-engineered epitaxial SrMnO3 thin films

Hongguang Wang Dr. Vesna Srot Dr. Yi Wang Dr. Hans Boscker Prof. Dr. Jochen Mannhart Prof. Dr. Peter van Aken

C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.2: Session 2
Session starts at 14:30 Lecture
Crackling noise in multicaloric ammonium sulphate under thermal cycling

Dr. Guillaume Nataf Prof. Michael Carpenter Dr. Eduard Vives Dr. Sam Crossley Dr. Xavier Moya

F01: High-Temperature Functional Materials
F01.2: High-Temperature Sensor Materials
Session starts at 14:30 Lecture
Electromechanical loss and ionic transport in CTGS single crystals at temperatures up to 1200 °C

Dr. Yuriy Suhak Dr. Michal Schulz Dr. Ward Johnson Prof. Dr. Holger Fritze

F04: Mixed Ionic-Electronic Conductors: Novel Oxide Materials and Engineered Microstructures
F04.2: Session 2
Session starts at 14:30 Lecture
CSD-grown superconducting GdBa2Cu3O7-delta nanocomposite films: a comparison between in-situ and ex-situ nanoparticle formation

Dr. Pablo Cayado

M03: Microstructure Evolution in Applied Materials: Process to Property
M03.2: Chemo-Mechanical Coupling in Metals
Session starts at 14:30 Lecture
Multi-scale mechanics of tungsten: Microstructure evolution under fusion conditions

Varun Shah Prof. Dr. Marc Geers Dr. Hans van Dommelen

M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.2: Session 2
Session starts at 14:30 Lecture
From single crystals to polycrystalline material modeling: a FFT-based Dislocation Dynamics approach

Dr. Francesca Boioli Dr. Benoit Devincre Dr. Riccardo Gatti Dr. Lionel Gélébart Dr. Laurant Dupuy

P01: Manipulation of Matter by Electric and Magnetic Fields
P01.2: Session 2
Session starts at 14:30 Lecture
Processing of Ceramic Composites via Single-Mode Microwave Sintering

Dr. Selva Vennila Raju Dr. Michael Kornecki Dr. Victoria Blair Dr. Raymond Brennan

P02: Additive Manufacturing Technologies and Materials
P02.2: Materials Processing and Characterization
Session starts at 14:30 Lecture
Powder development and characterization for the additive manufacturing of cemented carbide components

Thomas Rieger Tim Schubert Julian Schurr Simon Ruck Markus Hofele David Kolb Prof. Dr. Harald Riegel Dr. Timo Bernthaler Prof. Dr. Gerhard Schneider

P04: Nanocomposites and Nanolaminated Functional Coatings
P04.2: Microstructural Design and Nanocomposite Thin Films
Session starts at 14:30 Lecture
Generic Processing of Nanoparticle-based composite Coatings on Large Surfaces

Dipl.-Ing. Olivier Sublemontier Dr. Youri Rousseau

P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.2: Nanocoatings for Microelectronics, Energy Conversion and Storage
Session starts at 14:30 Lecture
Atomic Layer Deposition of Spin Hall Active Platinum Thin Films

Michaela Lammel Richard Schlitz Dr. Akinwumi Abimbola Amusan Stefanie Schlicht Dr. Tommi Tynell Prof. Dr. Julien Bachmann Prof. Dr. Georg Woltersdorf Prof. Dr. Kornelius Nielsch Prof. Dr. Sebastian T.B. Goennenwein Dr. Andy Thomas

S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms
Session starts at 14:30 Lecture
Ductilisation of tungsten (W) through cold-rolling: Mechanisms of plastic deformation in cold rolled, ultrafine-grained tungsten sheets

Simon Bonk Dr. Andreas Hoffmann Dr. Jan Hoffmann Ute Jäntsch Dr. Michael Klimenkov Dr. Jens Reiser

S06: Compositionally Complex Alloys – High Entropy Alloys
S06.2: Basics and Overviews
Session starts at 14:30 Lecture
Calphad thermodynamic database for fcc-based multi-principal element alloys

Dr. Bengt Hallstedt

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.2: Nanostructured Materials and High-Entropy Alloys
Session starts at 14:30 Lecture
Features of nanostructured materials for micromanufacturing

Dr. Roman Kulagin Prof. Yuri Estrin Prof. Yan Beygelzimer Dr. Andrej Mazilkin Dr. Dmytro Pavlenko Prof. Horst Hahn

15:48
C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography
Session starts at 14:30 Oral Poster
Solute-dislocation interactions investigated by correlative microscopy combining Atom Probe and (Scanning) Transmission Electron Microscopy

Ph.D. Florian Chabanais

16:00
Y: Breaks Coffee Break
Coffee Break
16:30
B05: Biomaterials Applications
B05.3: Session 3
Session starts at 16:30 Lecture
Mechanically- and chemically-active nanostructured antibacterial surfaces fabricated by glancing angle sputter deposition

Nadine Ziegler Prof. Dr. Christina Sengstock Viola Mai Prof. Dr. Kristina Tschulik Prof. Dr. Manfred Köller Prof. Dr. Alfred Ludwig

C05: Small Scale and In Situ Mechanical Testing
C05.3: Fatigue
Session starts at 16:30 Lecture
An experimental and microstructural investigation of biaxial Bauschinger effects in IF steel DC06 using in-situ neutron diffraction

Dr.-Ing. Markus Härtel Dr. Tobias Panzner Dr. Enrico Bruder Dr. Stefan Schmaltz Dr. Steven van Petegm Prof. Dr. Kai Willner Prof. Dr. Helena van Swygenhoven Prof. Dr. Martin F.-X. Wagner

C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.3: Session 3
Session starts at 16:30 Lecture
Advancing materials by SPD-mediated lattice defect engineering

Prof. Dr. Michael Zehetbauer Prof. Dr. Ernst Bauer Dr. Maciej Krystian Prof. Dr. Roland Grössinger Prof. Dr. Gerhard Krexner Dr. Jelena Horky Dr. Bernhard Mingler Dr. Gerda Rogl Prof. Dr. Peter Rogl

F01: High-Temperature Functional Materials
F01.3: Metallic High-Temperature Materials
Session starts at 16:30 Lecture
High temperature corrosion in waste-to-energy plants due to chlorine release through sulfation reaction of alkali chlorides

Sebastian Pentz Daniel Ott Prof. Dr. Ferdinand Haider Dr. Ragnar Warnecke

F04: Mixed Ionic-Electronic Conductors: Novel Oxide Materials and Engineered Microstructures
F04.3: Session 3
Session starts at 16:30 Lecture
Is ReO3 a mixed ionic–electronic conductor? A DFT study of defect formation and migration in a B(VI)O3 perovskite-type oxide

Jana P. Parras

M03: Microstructure Evolution in Applied Materials: Process to Property
M03.3: Polymers and Miscellaneous
Session starts at 16:30 Keynote Lecture
Shape memory effect in polymers containing small molecules

Dr. Fathollah Varnik Dipl.-Ing. Elias Mahmoudinezhad Zirdehi

M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.3: Session 3
Session starts at 16:30 Keynote Lecture
A direct look at how dislocations move

Dr. Alexander Stukowski

P01: Manipulation of Matter by Electric and Magnetic Fields
P01.3: Session 3
Session starts at 16:30 Highlight Lecture
Reaction controlled field assisted sintering of ceramic nanocomposites

Prof. Dr. Andrey Ragulya

P02: Additive Manufacturing Technologies and Materials
P02.3: Processes
Session starts at 16:30 Lecture
Printing Photopolymers by Hot Lithography

Bernhard Steyrer Prof. Robert Liska Prof. Jürgen Stampfl

P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.3: Hybrid and Molecular Layer Deposition
Session starts at 16:30 Keynote Lecture
Hybrid Materials by Vapor Phase Infiltration of Ceramics into Polymers

Prof. Dr. Mato Knez

P07: Joining
P07.1: Session 1
Session starts at 16:30 Lecture
Development of a high temperature resistant reactive filler alloy for brazing of SiC

Dipl.-Ing. Marius Graffé Sven Roszeitis Dr. Marion Herrmann Dr. Hans-Peter Martin Prof. Dr. Wolfgang Lippmann

S05: Bulk Ultrafine- and Nano-Structured Materials
S05.3: Thermal Effects and Magnetic Properties
Session starts at 16:30 Lecture
Formation of ω phase in Ti–Fe alloys and its stability upon heating

Dr.-Ing. Mario J. Kriegel Dr. Askar Kilmametov Dr. Volker Klemm Dr. Olga Fabrichnaya Prof. Dr. Boris B. Straumal Prof. Dr. Julia Ivanisenko Prof. Dr. Horst Hahn Prof. Dr. David Rafaja

S06: Compositionally Complex Alloys – High Entropy Alloys
S06.3: Microstructure
Session starts at 16:30 Lecture
Microstructural properties of Al-containing refractory high entropy alloys for high temperature applications

Dipl.-Ing. Hans Chen Dr. Alexander Kauffmann Sascha Seils Dr. Torben Boll Ian Harding Prof. K. Sharvan Kumar Dr. Dorothée Vinga Szabó Franz Müller Dr. Bronislava Gorr Prof. Dr. Hans-Jürgen Christ Prof. Dr. Martin Heilmaier

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.3: Properties of SPD Materials and Nanocomposites
Session starts at 16:30 Keynote Lecture
Incremental Feedings with High-Pressure Torsion (IF-HPT) and High-Pressure Sliding (IF-HPS) for Upsizing Sample Dimensions

Prof. Zenji Horita

16:45
B05: Biomaterials Applications
B05.3: Session 3
Session starts at 16:30 Lecture
Additive manufacturing of titanium-hydrogel-hydroxyapatite hybrid constructs for regeneration of cranial bone defects

Vera Bednarzig Prof. Dr. Aldo Boccaccini Dr. Rainer Detsch

C05: Small Scale and In Situ Mechanical Testing
C05.3: Fatigue
Session starts at 16:30 Lecture
The role of room temperature grain coarsening on initiation of fatigue damage in thin metal films

Dr. Oleksandr Glushko

C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.3: Session 3
Session starts at 16:30 Lecture
Mechanical properties and deformation mechanisms in alloys Hastelloy X and Haynes 214 for honeycomb liners

Sonun Ulan Kyzy Oliver Munz Tim Fischer Sarah Welzenbach Dr. Rainer Völkl Prof. Dr. Uwe Glatzel

F01: High-Temperature Functional Materials
F01.3: Metallic High-Temperature Materials
Session starts at 16:30 Lecture
Microstructure evolution in Ni-containing Co-Re-Cr alloys and its effect on alloy properties

Katharina Esleben Dr. Bronislava Gorr Prof. Dr. Hans-Jürgen Christ Dr. Debashis Mukherji Prof. Dr. Joachim Rösler

F04: Mixed Ionic-Electronic Conductors: Novel Oxide Materials and Engineered Microstructures
F04.3: Session 3
Session starts at 16:30 Lecture
Determining defect concentrations from voltage and partial pressure dependent chemical capacitance measurements

Dipl.-Ing. Alexander Schmid Prof. Dr. Jürgen Fleig

P01: Manipulation of Matter by Electric and Magnetic Fields
P01.3: Session 3
Session starts at 16:30 Lecture
Pattern Formation during Current Sintering - Experiments

Claudia Gorynski Prof. Dr. Markus Winterer

P02: Additive Manufacturing Technologies and Materials
P02.3: Processes
Session starts at 16:30 Lecture
Additive manufacturing of Low Temperature Co-fired Ceramic by DLP technology

Dr.-Ing. Elena Xuriguera Joana Gonçalves Pol Barcelona Dr. Jose A. Padilla Dr. Albert Cirera

P07: Joining
P07.1: Session 1
Session starts at 16:30 Lecture
Study of a diffusion couple of pure Fe/Ti

Dr.-Ing. Aurelien Besnard Dr. Cotton Dominique

S05: Bulk Ultrafine- and Nano-Structured Materials
S05.3: Thermal Effects and Magnetic Properties
Session starts at 16:30 Lecture
Magnetic Binary Supersaturated Solid Solutions processed by Severe Plastic Deformation

Dipl.-Ing. Martin Stückler Dr. Stefan Wurster Dr. Andrea Bachmaier

S06: Compositionally Complex Alloys – High Entropy Alloys
S06.3: Microstructure
Session starts at 16:30 Lecture
Effect of macroalloying on microstructure and high temperature oxidation resistance of new refractory compositionally complex alloys

Franz Müller Dr. Bronislava Gorr Prof. Dr. Hans-Jürgen Christ Hans Chen Dr. Alexander Kauffmann Prof. Dr. Martin Heilmaier

17:00
B05: Biomaterials Applications
B05.3: Session 3
Session starts at 16:30 Lecture
Synthesis of polymeric hydrogel coatings with an atmospheric pressure plasma jet for biomedical applications

Monique Levien Dr. Ihsan Amin Prof. Dr. Klaus-Dieter Weltmann Dr. Katja Fricke

C05: Small Scale and In Situ Mechanical Testing
C05.3: Fatigue
Session starts at 16:30 Highlight Lecture
Effect of sample size and grain boundaries on the dislocation structures and damage evolution: A micro-fatigue investigation

Dipl.-Ing. Jorge Rafael Velayarce Prof. Dr. Christian Motz

C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.3: Session 3
Session starts at 16:30 Lecture
Creep deformation mechanisms in SX Co-base superalloys: Compositional changes at planar faults studied by means of TEM and APT

Malte Lenz Yolita Eggeler Dr. Julian Mueller Dr. Christopher Zenk Dr. Steffen Neumeier Prof. Dr. Peter Felfer Dr. Surendrar Makineni Dr. Baptiste Gault Prof. Dr. Mathias Göken Prof. Dr. Erdmann Spiecker

F01: High-Temperature Functional Materials
F01.3: Metallic High-Temperature Materials
Session starts at 16:30 Lecture
Finite Element Simulation of the elastic anisotropic material behaviour of coarse-grained nickel base superalloys

Dipl.-Ing. Benedikt Engel Prof. Dr. Tilmann Beck

F04: Mixed Ionic-Electronic Conductors: Novel Oxide Materials and Engineered Microstructures
F04.3: Session 3
Session starts at 16:30 Lecture
Characterization and investigation of Fe:STO thin films prepared by pulsed laser deposition

Dipl.-Ing. Maximilian Morgenbesser Dr. Stefanie Taibl Dr. Markus Kubicek Alexander Viernstein Christopher Herzig Prof. Dr. Andreas Limbeck Prof. Dr. Jürgen Fleig

M03: Microstructure Evolution in Applied Materials: Process to Property
M03.3: Polymers and Miscellaneous
Session starts at 16:30 Lecture
Numerical investigation of the pore evolution in polycrystalline fibers

Dr. Julia Kundin

M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.3: Session 3
Session starts at 16:30 Lecture
Atomistic simulations of the deformation behavior of thin film structures

Dr. Aruna Prakash Aviral Vaid Dr. Hao Lyu Dr. Eva Preiß Dr. Benoit Merle Prof. Erik Bitzek

P01: Manipulation of Matter by Electric and Magnetic Fields
P01.3: Session 3
Session starts at 16:30 Lecture
Pattern formation during current sintering – Simulation

Lukas Engelke Prof. Dr. Dietrich E. Wolf

P02: Additive Manufacturing Technologies and Materials
P02.3: Processes
Session starts at 16:30 Lecture
Additive manufacturing of soft magnetic materials and components

David Schuller Torsten Kunert Julian Schurr Tim Schubert Dr. Timo Bernthaler Prof. Dr. Harald Riegel Prof. Dr. Dagmar Goll Prof. Dr. Gerhard Schneider

P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.3: Hybrid and Molecular Layer Deposition
Session starts at 16:30 Lecture
Atomic/molecular layer deposition of azobenzene-containing hybrid thin films with reversible photoresponsive behaviour

Dipl.-Ing. Aida Khayyami Prof. Maarit Karppinen

P07: Joining
P07.1: Session 1
Session starts at 16:30 Lecture
Resistance Spot Welding of Aluminum-Steel Joints Using Modern Medium-Frequency Inverter Technique (MFDC)

Prof. Dr.-Ing. Mario Säglitz Dr. Dirk Berger Alexander Winkler Florian Kiss

S05: Bulk Ultrafine- and Nano-Structured Materials
S05.3: Thermal Effects and Magnetic Properties
Session starts at 16:30 Highlight Lecture
Influence of annealing on microstructure and mechanical properties of ultrafine-grained Ti45Nb

Anton Hohenwarter Bernhard Völker

S06: Compositionally Complex Alloys – High Entropy Alloys
S06.3: Microstructure
Session starts at 16:30 Lecture
Introducing a chip based µ-bulk setup for microscopic heat treatment studies of compositionally complex single crystal superalloys

Dorota Kubacka Yolita Eggeler Prof. Dr. Erdmann Spiecker

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.3: Properties of SPD Materials and Nanocomposites
Session starts at 16:30 Lecture
Mechanical and Structural behavior of Cu/Fe Nanocomposites produced by Accumulative Roll Bonding

Ph.D. Maher Ghanem Dr. Benoit Merle Prof. Dr. Heinz Werner Höppel Prof. Dr. Mathias Göken

17:15
B05: Biomaterials Applications
B05.3: Session 3
Session starts at 16:30 Lecture
Localized corrosion and cytotoxic effect of ASTM F745 in culture medium

Dr. Ricardo Gregorutti Prof. Jorge Grau Prof. Daniel Castrogiovanni Prof. Julieta Parisi Dr. Cecilia Elsner

C05: Small Scale and In Situ Mechanical Testing
C05.3: Fatigue
Session starts at 16:30 Lecture
Degradation of superelastic NiTi during uniaxial and multiaxial cyclic loading

Prof. Dr. Helena Van Swygenhoven Dr. Miroslav Smid Dr. Steven Van Petegem Dr. Efthymios Polatidis Wei-Neng Hsu

C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.3: Session 3
Session starts at 16:30 Lecture
Microstructure Evolution of Niobium Rich Advanced Titanium Aluminide Alloy During Hot Compression

Bhavanish Kumar Singh V. Anil Kumar Dr. Rohit Kumar Gupta Dr. Anand Krishna Kanjarla

F01: High-Temperature Functional Materials
F01.3: Metallic High-Temperature Materials
Session starts at 16:30 Lecture
Thermomechanical Induced Precipitation of Intermetallic Phase Particles in Ferritic Stainless Steels

Dipl.-Ing. Jana Pöpperlová Xiuru Fan Dr. Bernd Kuhn Prof. Wolfgang Bleck

F04: Mixed Ionic-Electronic Conductors: Novel Oxide Materials and Engineered Microstructures
F04.3: Session 3
Session starts at 16:30 Lecture
Oxygen isotope exchange on ceria: CO2 splitting in the temperature range between 300 and 900 °C

Daniel Uxa Dr. Lars Dörrer Dr. Peter Fielitz Prof. Dr. Günter Borchardt Dr. Stefan Beschnitt Nicole Knoblauch Prof. Dr. Martin Schmücker

M03: Microstructure Evolution in Applied Materials: Process to Property
M03.3: Polymers and Miscellaneous
Session starts at 16:30 Lecture
Thermal energy storage in cement pastes containing microencapsulated phase change materials: a microstructural model analysis

Ph.D. Antonio Caggiano Christoph Mankel Prof. Dr. Eduardus A.B. Koenders

M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.3: Session 3
Session starts at 16:30 Lecture
Atomic-Level Processes of Shear Band Nucleation in Metallic Glasses

Dr. Daniel Sopu Dr. Alexander Stukowski Dr. Mihai Stoica Dr. Sergio Scudino Prof. Dr. Jürgen Eckert

P01: Manipulation of Matter by Electric and Magnetic Fields
P01.3: Session 3
Session starts at 16:30 Lecture
Field Assisted Sintering of Rare Earth Doped Ceria (REDC)

Tarini Prasad Mishra Sree Koundinya Sistla Prof. Alexander Laptev Prof. Dr. Olivier Guillon Dr. Anke Kaletsch Prof. Dr. Christoph Broeckmann Dr. Martin Bram

P02: Additive Manufacturing Technologies and Materials
P02.3: Processes
Session starts at 16:30 Lecture
Experimental analysis of laser post-processing of additive manufactured metallic parts

Juliana dos Santos Solheid Dr. Wilhelm Pfleging Prof. Dr. Hans Jürgen Seifert

P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.3: Hybrid and Molecular Layer Deposition
Session starts at 16:30 Lecture
Search for Novel Inorganic-Organic Carboxylate Network Thin Film Structures by Atomic/Molecular Layer Deposition

Dipl.-Ing. Jenna Penttinen Dr. Mikko Nisula Prof. Maarit Karppinen

P07: Joining
P07.1: Session 1
Session starts at 16:30 Lecture
Joining aluminium with copper for applications in electro mobility

Dr. Jörg Kaspar Andrea Ostwaldt Andreas Grimm Dr. Jens Standfuß Prof. Dr. Martina Zimmermann

S05: Bulk Ultrafine- and Nano-Structured Materials
S05.3: Thermal Effects and Magnetic Properties
Session starts at 16:30 Lecture
Investigation of Phase Transformation and Grain Growth in Nanocrystalline Austenitic Stainless Steels Produced by High Energy Mechanical Alloying

Dr. Hasan Kotan Dr. Kris Darling

S06: Compositionally Complex Alloys – High Entropy Alloys
S06.3: Microstructure
Session starts at 16:30 Lecture
Trace elements influencing the lattice parameters in the Al10Co25Cr8Fe15Ni36Ti6 compositionally complex alloy

Dr. Anna Manzoni Sebastian Haas Felix Dubois Christoph von Schlippenbach Cafer Tufan Cakir Prof. Dr. Marwan Mousa Prof. Dr. Uwe Glatzel Dr. Nelia Wanderka

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.3: Properties of SPD Materials and Nanocomposites
Session starts at 16:30 Highlight Lecture
Understanding plasticity of pearlitic nanolamellar structures through a simple material model

Ph.D. Jon Alkorta Dr. Peter De Jaeger Prof. José Manuel Martínez Esnaola Prof. Javier Gil Sevillano

17:30
B05: Biomaterials Applications
B05.3: Session 3
Session starts at 16:30 Lecture
A new method for obtaining magnetic Bioactive glass 45S5® 3D scaffolds modified with nanoparticles of iron-loaded hydroxyapatite, characterization, and evaluation of its biocompatibility in different types of cells.

Dipl.-Ing. Maria Laura Dittler Dr. Gerhard Frank Irem Unalan Alina Grünewald Prof. Dr. Monica Gonzalez Prof. Dr. Aldo Boccaccini

C05: Small Scale and In Situ Mechanical Testing
C05.3: Fatigue
Session starts at 16:30 Lecture
Small scale fatigue crack growth and fracture: a case study in the nickelbase superalloy CMSX-4

Patrick Grünewald Florian Schäfer Dr. Michael Marx Prof. Dr. Christian Motz

C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.3: Session 3
Session starts at 16:30 Lecture
SFB-TR-103: Interdisciplinary Scale Bridging Material Science of Co- and Ni-based Single Crystal Superalloys

Prof. Dr. Gunther Eggeler

F01: High-Temperature Functional Materials
F01.3: Metallic High-Temperature Materials
Session starts at 16:30 Lecture
Oxidation behaviour of roughing mill work rolls and effect on thermomechanical fatigue

Kai Bläser Dr. Bronislava Gorr Prof. Dr. Hans-Jürgen Christ

F04: Mixed Ionic-Electronic Conductors: Novel Oxide Materials and Engineered Microstructures
F04.3: Session 3
Session starts at 16:30 Keynote Lecture
Ionic conductivity of acceptor doped sodium bismuth titanate (NBT): Influence of dopants, phase transitions and defect associates

Sebastian Steiner Leonie Koch Dr. Kai-Christian Meyer Dr. In-Tae Seo Prof. Dr. Karsten Albe Dr. Till Frömling

M03: Microstructure Evolution in Applied Materials: Process to Property
M03.3: Polymers and Miscellaneous
Session starts at 16:30 Lecture
Self-organization of nanostructured morphologies in physical vapor deposited immiscible alloys

Rahul Raghavan Dr. Benyamin Gholami Bazehhour Prof. Dr. Kiran Solanki Prof. Dr. Kumar Ankit

M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.3: Session 3
Session starts at 16:30 Lecture
Atomistic and mesoscale simulations of nanoindentation and nanoscratching of metals – A statistical approach to characterize discrete dislocation microstructures

Prof. Dr. Nina Gunkelmann Dr. Iyad Alabd Alhafez Dominik Steinberger Prof. Dr. Herbert Urbassek Prof. Dr. Stefan Sandfeld

P01: Manipulation of Matter by Electric and Magnetic Fields
P01.3: Session 3
Session starts at 16:30 Lecture
Grain growth in electric field: Influence of Defects, Space Charge and Atmosphere

Prof. Wolfgang Rheinheimer Jana P. Parras Cong Tao Prof. Dr. Christian Elsässer Prof. Dr. Roger A. De Souza Prof. Dr. Michael J. Hoffmann Jan-Helmut Preusker

P02: Additive Manufacturing Technologies and Materials
P02.3: Processes
Session starts at 16:30 Lecture
In Situ and Real-Time Quality Monitoring of AM/Laser Process

Dr. Tri Le Quang Dr. Sergey Shevchik Dr. Bastian Meylan Dr. Margie Olbinado Dr. Alexander Rack Dr. Kilian Wasmer

P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.3: Hybrid and Molecular Layer Deposition
Session starts at 16:30 Lecture
Simultaneous enhancement of toughness and elimination of the UV sensitivity of Kevlar with a combined ALD/MPI process

Ph.D. Itxasne Azpitarte Prof. Dr. Mato Knez

P07: Joining
P07.1: Session 1
Session starts at 16:30 Lecture
Tailoring the thickness of intermetallic interfacial nanolayers by temperature control of FSW in Al-Cu lap joints

Roland Marstatt Markus Krutzlinger Johannes Luderschmid Prof. Dr. Michael F. Zäh Prof. Dr. Ferdinand Haider

S05: Bulk Ultrafine- and Nano-Structured Materials
S05.3: Thermal Effects and Magnetic Properties
Session starts at 16:30 Lecture
Recrystallisation in K-doped and pure cold rolled tungsten (W) sheets: As-rolled condition and isochronal annealings (1 h)

Philipp Lied Carsten Bonnekoh Prof. Dr. Wolfgang Pantleon Dr. Andreas Hoffmann Dr. Jens Reiser

S06: Compositionally Complex Alloys – High Entropy Alloys
S06.3: Microstructure
Session starts at 16:30 Lecture
Phase stability and solid solution strengthening in fcc high-entropy alloys investigated by a diffusion couple approach

Tom Christopher Keil Dr. Enrico Bruder Prof. Dr. Karsten Durst

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.3: Properties of SPD Materials and Nanocomposites
Session starts at 16:30 Highlight Lecture
Interaction of Hydrogen with SPD-induced Lattice Defects: Features and Properties

Prof. Dr. Michael Zehetbauer Peter Cengeri Wolfgang Reß Prof. Dr. Gerhard Krexner Prof. Dr. Erhard Schafler Dr. Daria Setman

17:45
B05: Biomaterials Applications
B05.3: Session 3
Session starts at 16:30 Lecture
Novel strategy for immunoprotective islet macroencapsulation

Dr. Katarzyna Skrzypek Prof. Dimitrios Stamatialis

C05: Small Scale and In Situ Mechanical Testing
C05.3: Fatigue
Session starts at 16:30 Lecture
Dynamic Micro Testing Overcoming 5 Decades of Strain Rates

Dipl.-Ing. Frank Huberth

C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.3: Session 3
Session starts at 16:30 Oral Poster
The Impact of Residual Stress on the Crack Growth Behavior in Martensitic Steels

Anna Wildeis Prof. Dr. Robert Brandt

M03: Microstructure Evolution in Applied Materials: Process to Property
M03.3: Polymers and Miscellaneous
Session starts at 16:30 Lecture
The Generation of Random Surfaces by Means of Additive Manufacturing with respect to Offset-Issues

Kevin Noack Prof. Dr. Daniel Lordick

M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.3: Session 3
Session starts at 16:30 Lecture
Investigation of size effects on the plastic zone properties at crack tip

Ph.D. Riccardo Gatti Dr. Laurent Korzeczek Dr. Arjen Roos Dr. Benoit Devincre

P01: Manipulation of Matter by Electric and Magnetic Fields
P01.3: Session 3
Session starts at 16:30 Lecture
Improving efficiency and temperature distribution during field assisted sintering by advanced thermal insulation

Dr. Martin Bram Prof. Dr. Alexander Laptev Prof. Dr. Kim Vanmeensel Prof. Dr. Jesus Gonzalez-Julian Prof. Dr. Olivier Guillon

P02: Additive Manufacturing Technologies and Materials
P02.3: Processes
Session starts at 16:30 Oral Poster
Shaping, debinding and sintering as a low cost additive manufacturing method of solid metal

Yvonne Thompson Prof. Peter Felfer Dr. Christian Kukla Dr. Joamin Gonzalez - Gutierrez

P07: Joining
P07.1: Session 1
Session starts at 16:30 Lecture
Nano-soldering pseudo-composite material to decrease engine bearing failure

Dr.-Ing. Paul-Cristian Olaru

S05: Bulk Ultrafine- and Nano-Structured Materials
S05.3: Thermal Effects and Magnetic Properties
Session starts at 16:30 Lecture
Structural analysis and magnetic properties of Fe-Co-Ag and Fe-Co-Cu alloys processed by severe plastic deformation

Dr. Andrea Bachmaier Dr. Stefan Wurster Mirjam Spuller Martin Stückler

S06: Compositionally Complex Alloys – High Entropy Alloys
S06.3: Microstructure
Session starts at 16:30 Lecture
Priority Programme (SPP2006) Compositionally Complex Alloys - High Entropy Alloys (CCA - HEA)

Prof. Dr. Uwe Glatzel Dr. Anna Manzoni Dr. Bronislava Gorr

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.3: Properties of SPD Materials and Nanocomposites
Session starts at 16:30 Lecture
Grain structure and mechanical properties of the commercially pure copper and Cu-Al hybrid materials processed by the High Pressure Torsion Extrusion

Dayan Nugmanov Dr. Roman Kulagin Dr. Yulia Ivanisenko Prof. Dr. Horst Hahn

17:48
P02: Additive Manufacturing Technologies and Materials
P02.3: Processes
Session starts at 16:30 Oral Poster
Microstructure of Fe-Nd-B processed by selective laser melting

Ulrich Pflanz David Vogelgsang Julian Schurr Dr. Timo Bernthaler David Kolb Prof. Dr. Harald Riegel Prof. Dr. Dagmar Goll Prof. Dr. Gerhard Schneider

17:51
P02: Additive Manufacturing Technologies and Materials
P02.3: Processes
Session starts at 16:30 Oral Poster
Porous Structures Developed from Novel thermoplastic-ceramic Systems Via Fused Deposition

Dr. Maria Andrea Camerucci

17:54
P02: Additive Manufacturing Technologies and Materials
P02.3: Processes
Session starts at 16:30 Oral Poster
Additive production of 3D-structured, highly filled nanoparticle-reinforced composite materials

Lisa Windisch Benedikt Finke Prof. Dr. Carsten Schilde

Thursday (27.09.2018)

08:30
L: Plenary Lectures Plenary Lecture
Films and composites from cellulose nanocrystals: Thermal, viscoelastic and mechanical properties

Prof. Dr. Mirta I. Aranguren

09:00
Y: Breaks Time to change the room
Time to change the room
09:15
B06: Biomaterials for Bone Substitution and Regeneration
B06.1: Session 1
Session starts at 09:15 Lecture
Influence of Ca and B incorporation on the network architecture and bioactivity of SiOC-based glasses

Fangtong Xie Dr. Isabel Gonzalo de Juan Dr. Emanuel Ionescu Prof. Dr. Aldo R. Boccaccini

C02: Going 3D: From Image to Knowledge
C02.1: Session 1
Session starts at 09:15 Keynote Lecture
Development of 3D tomogprahy holder for tensile deformation of soft materials

Prof. Hiroshi Jinnai

C05: Small Scale and In Situ Mechanical Testing
C05.4: Fracture II & Indentation I
Session starts at 09:15 Keynote Lecture
Nanoindentation methods for fracture toughness measurement at the micron scale

Dr. Marco Sebastiani

F02: Surface Engineering and Functionalisation
F02.1: Wear and Friction Reduction
Session starts at 09:15 Highlight Lecture
Laser-applied high performance tribological coatings on light weight materials

Dr. Anna Buling Jörg Zerrer

F04: Mixed Ionic-Electronic Conductors: Novel Oxide Materials and Engineered Microstructures
F04.4: Session 4
Session starts at 09:15 Highlight Lecture
A phase-field model for multi-grain and multi-crystal ferroelectric materials

Dipl.-Ing. Walter Werner Dr. Daniel Schneider Dr. Manuel Hinterstein Dr. Gunnar Picht Prof. Dr. Britta Nestler

F06: Materials Design for Electrochemical Energy Storage
F06.1: Electrode Microstructure
Session starts at 09:15 Lecture
Effect of particle size and hierarchical structuring on the electrochemical properties of NCM-cathode materials in lithium-ion-batteries

Dr. Amalia Wagner Dr. Joachim R. Binder Nicole Bohn

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.1: Iron-Base and Steel Systems
Session starts at 09:15 Lecture
Ab initio and CALPHAD guided design of materials for nuclear fuel cladding applications

Prof. Dr. Keke Chang

M02: Atomistic Methods for Designing
M02.1: Bulk Materials, Nanoparticles and Thin Films
Session starts at 09:15 Lecture
Stacking fault energies of CrMnFeCoNi-based high entropy alloys from ab initio

Dr. Yuji Ikeda Dr. Fritz Körmann Prof. Dr. Jörg Neugebauer

P01: Manipulation of Matter by Electric and Magnetic Fields
P01.4: Session 4
Session starts at 09:15 Lecture
Fine-tuning low-temperature response of the FeCoCrMnNi high-entropy alloy by field-assisted cooling

Dr. Martin Friak Dr. Oldřich Schneeweiss Dr. Marie Dudová Prof. David Holec Prof. Dr. Mojmír Šob Dr. Dominik Kriegner Prof. Dr. Václav Holý Dr. Přemysl Beran Prof. Dr. Easo-P. George Prof. Dr. Jörg Neugebauer Prof. Dr. Antonín Dlouhý

P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.1: Session 1
Session starts at 09:15 Keynote Lecture
Stoichiometry control and 2D compositional patterning of oxide thin films by magnetron sputtering at oblique angles

Prof. Dr. Augustin R. González-Elipe Aurelio García-Valenzuela Dr. Rafael Alvarez-Molina Prof. Juan Pedro Espinós Dr. Victor Rico Prof. Javier Solis Dr. Alberto Palmero

S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.1: Process-Microstructure-Property Relations in AM Metals I
Session starts at 09:15 Highlight Lecture
Processing glass-forming alloys by selective laser melting

Dr.-Ing. Simon Pauly Liang Deng Dr. Uta Kühn

S06: Compositionally Complex Alloys – High Entropy Alloys
S06.4: Towards Application
Session starts at 09:15 Keynote Lecture
On the Fracture Behavior of TRIP, TWIP and Dual-Phase High-Entropy Alloys

Dr. Bernd Gludovatz Hyun Seok Oh Prof. Eun Soo Park Prof. Robert Ritchie

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.4: Fatigue and Failure
Session starts at 09:15 Keynote Lecture
Cyclic deformation and fatigue lives of ultrafine-/nanograined materials

Prof. Dr. Hael Mughrabi

Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.1: Session Z01 - Ch. S. P. Brühl and A. R. Boccaccini
Session starts at 09:15 Lecture
Materials Characterization by Diffraction Techniques. X-rays, Neutrons, Synchrotron Radiation and EBSD: A Critical Assessment of their Capabilities and Relative Advantages.

Prof. Dr. Raúl Bolmaro Dr. Martina Avalos Prof. Dr. Heinz-Gunter Brokmeier

09:30
B06: Biomaterials for Bone Substitution and Regeneration
B06.1: Session 1
Session starts at 09:15 Lecture
Innovative and Highly-Sustainable Bread-Derived Bioactive Glass Scaffolds for Bone Tissue Engineering

Ph.D. Elisa Fiume Dr. Francesco Baino Prof. Enrica Verné

F02: Surface Engineering and Functionalisation
F02.1: Wear and Friction Reduction
Session starts at 09:15 Lecture
High speed surface functionalization employing Direct Laser Interference Patterning – Basic principles, industrial approaches and structure lifetime

Dr. Tim Kunze Benjamin Krupop Sabri Alamri Tobias Steege Alfredo Aguilar Mikhael El-Khoury Sophie Trautewig Florian Rößler Andrés Fabián Lasagni

F04: Mixed Ionic-Electronic Conductors: Novel Oxide Materials and Engineered Microstructures
F04.4: Session 4
Session starts at 09:15 Lecture
The Role of defects and internal stresses on tuning the multifunctional properties of Metamagnetic Shape Memory Alloys

Prof. Fernando Plazaola I. Unzueta J. Lopez-Garcia Dr. V. Sanchez-Alarcos Dr. V. Recarte Dr. J. I. Perez-Landazabal J. A. Rodríguez-Velamazán Dr. J. J. S. Garitaonandia Prof. J. A. Garcia

F06: Materials Design for Electrochemical Energy Storage
F06.1: Electrode Microstructure
Session starts at 09:15 Lecture
A Novel Method for a Detailed 3D Reconstruction of Lithium-Ion Battery Anodes

Dr. Jochen Joos Dr. André Weber Remco Geurts Steven Randolph Renae Gannon Dr. Herman Lemmens Prof. Ellen Ivers-Tiffée

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.1: Iron-Base and Steel Systems
Session starts at 09:15 Lecture
Thermodynamic description of alpha-Fe-C under non-hydrostatic stress

Prof. Dr. Andreas Leineweber

M02: Atomistic Methods for Designing
M02.1: Bulk Materials, Nanoparticles and Thin Films
Session starts at 09:15 Lecture
Atom packing Changes of TiAl Alloy Nanoparticles during Heating and Coalescence by Molecular Dynamics Method

Dr. Lin Zhang

P01: Manipulation of Matter by Electric and Magnetic Fields
P01.4: Session 4
Session starts at 09:15 Lecture
Magnetic Field Assisted Chemical Vapor Deposition: A Feasible Method for the Formation of Anisotropically Grown Magnetic Structures

Daniel Stadler Danny Bialuschewski Dr. Thomas Fischer Prof. Dr. Sanjay Mathur

S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.1: Process-Microstructure-Property Relations in AM Metals I
Session starts at 09:15 Lecture
Ultrafine Fe-Fe2Ti eutectics produced by laser metal deposition: processing and characterization

Angelos Theofilatos Georg Rödler Dr. Jan Haubrich Prof. Dr. Guillermo Requena Dr. Ulrike Hecht Dr. Romuald Laqua Dr. Andreas Weisheit Dr. Federico Sket Dr. Srdjan Milenkovic Prof. Dr. László Gránásy Dr. Tamás Pusztai László Rátkai

Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.1: Session Z01 - Ch. S. P. Brühl and A. R. Boccaccini
Session starts at 09:15 Lecture
Fatigue cracks analysis in high-strength bainitic steel.

Prof. Dr. María Cecilia Marinelli Dr. Marcela Balbi Prof. Dr. Ulrich Krupp

09:45
B06: Biomaterials for Bone Substitution and Regeneration
B06.1: Session 1
Session starts at 09:15 Lecture
Microstructure Engineering to Control the Degradation Rate in Biocompatible Mg -Zn-Ca-Zr Alloy

Dr. Fernando Warchomicka Klemens Holzleitner Prof. Dr. Christof Sommitsch Dipl.-Ing. Fatemeh Iranshahi

C02: Going 3D: From Image to Knowledge
C02.1: Session 1
Session starts at 09:15 Lecture
High-resolution X-ray nano-tomography for non-destructive imaging of porous materials and nanocomposites

Dr. Juliana Martins de Souza e Silva Prof. Martin Steinhart Prof. Ralf B. Wehrspohn

C05: Small Scale and In Situ Mechanical Testing
C05.4: Fracture II & Indentation I
Session starts at 09:15 Lecture
On problems with the determination of the fracture toughness of micro- and nanocomposites

Dr. Darjan Kozic Markus Alfreider Dr. Daniel Kiener Prof. Dr. Otmar Kolednik

F02: Surface Engineering and Functionalisation
F02.1: Wear and Friction Reduction
Session starts at 09:15 Lecture
Surface functionalization of sheet metals for lubricant free deep drawing processes

Theresa Sperk Seyed Ali Mousavi Valentin Lang Dr. Tim Kunze Prof. Dr. Andrés Fabian Lasagni

F04: Mixed Ionic-Electronic Conductors: Novel Oxide Materials and Engineered Microstructures
F04.4: Session 4
Session starts at 09:15 Lecture
Magnetocaloric effect associated to the arrested austenite in Ni-Mn-In-Co alloys

Dr. J. Inaki Pérez-Landazábal Dr. Vicente Recarte Dr. Vicente Sánchez-Alarcos J. Jesús Beato Dr. J. Alberto Rodríguez-Velamazán Dr. Jorge Sánchez-Marcos Dr. Cristina Gómez-Polo Dr. Eduard Cesari

F06: Materials Design for Electrochemical Energy Storage
F06.1: Electrode Microstructure
Session starts at 09:15 Lecture
Multiscale 3D imaging of hierarchically structured energy materials

Markus Osenberg Dr. André Hilger Matthias Neumann Dr. Amalia Wagner Nicole Bohn Dr. Joachim R. Binder Prof. Dr. Volker Schmidt Dr. Ingo Manke Prof. Dr. John Banhart

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.1: Iron-Base and Steel Systems
Session starts at 09:15 Lecture
Phase-field simulation of quenching and partitioning in a polycrystalline Fe-C system under constrained carbon-equilibrium condition

Prince Gideon Kubendran Amos Ephraim Schoof Nick Streichan Dr. Daniel Schneider Prof. Dr. Britta Nestler

M02: Atomistic Methods for Designing
M02.1: Bulk Materials, Nanoparticles and Thin Films
Session starts at 09:15 Lecture
Structural and elasticity properties of β/βo and α'/α2' phases in Ti-Al-Mo alloys: towards or- dering transitions

Neda Abdoshahi Mohammad Dehghani Andrei Ruban Prof. Dr. Svea Mayer Jürgen Spitaler Dr. David Holec Petra Erdely Michael Musi

P01: Manipulation of Matter by Electric and Magnetic Fields
P01.4: Session 4
Session starts at 09:15 Lecture
Manipulation of material properties of Al2O3 and SiO2 thin films by substrate biasing in plasma enhanced atomic layer deposition

Vivek Beladiya Tahsin Faraz Prof. Dr. Erwin Kessels Prof. Dr. Andreas Tünnermann Dr. Adriana Szeghalmi

P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.1: Session 1
Session starts at 09:15 Lecture
Ag-based binary alloy nanorods as SERS substrate by GLAD

Prof. Zhenjun Zhang

S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.1: Process-Microstructure-Property Relations in AM Metals I
Session starts at 09:15 Lecture
Precipitation kinetics during non-linear heat treatment in Laser Additive Manufacturing

Priyanshu Bajaj Dr. Eric Jägle Prof. Dr. Dierk Raabe

S06: Compositionally Complex Alloys – High Entropy Alloys
S06.4: Towards Application
Session starts at 09:15 Lecture
High-temperature strength of modified Compositionally Complex Alloy Al10Co25Cr8Fe15Ni36Ti6 (in at.%)

Dipl.-Ing. Sebastian Haas Dr. Anna Manzoni Prof. Dr. Uwe Glatzel

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.4: Fatigue and Failure
Session starts at 09:15 Lecture
What we can learn from hr-ebsd about crack closure effects during fatigue crack propagation

Marc Laub Matthias Thielen Florian Schäfer Dr. Michael Marx Prof. Dr. Christian Motz

Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.1: Session Z01 - Ch. S. P. Brühl and A. R. Boccaccini
Session starts at 09:15 Lecture
Influence of the stress-induced martensite on the corrosion behavior of a β CuAlBe shape memory alloy

Prof. Dr. Silvia Simison Dr. Susana Montecinos Dr. Martin Sláma Dr. Petr Klímek Dr. Sebastián Suarez

10:00
B06: Biomaterials for Bone Substitution and Regeneration
B06.1: Session 1
Session starts at 09:15 Lecture
Cyclic deformation characteristics of binary Ti-Nb alloys for hard tissue replacement

André Reck Stefan Pilz Martin Kuczyk Dr. Annett Gebert Prof. Dr. Martina Zimmermann

C02: Going 3D: From Image to Knowledge
C02.1: Session 1
Session starts at 09:15 Lecture
Quantitative 3D structure analysis of supported catalysts at the nanoscale

Wu Wang Dr. Di Wang Dr. Alberto Villa Prof. Dr. Horst Hahn Dr. Christian Kübel

C05: Small Scale and In Situ Mechanical Testing
C05.4: Fracture II & Indentation I
Session starts at 09:15 Lecture
Study on the embrittlement of flash annealed Fe85.2B9.5P4Cu0.8Si0.5 metallic glass ribbons

Christian Minnert Markus Kuhnt Sebastian Bruns Amalraj Marshal Dr. Konda Gokuldoss Pradeep Dr. Mie Marsilius Dr. Enrico Bruder Prof. Dr. Karsten Durst

F02: Surface Engineering and Functionalisation
F02.1: Wear and Friction Reduction
Session starts at 09:15 Lecture
Fatigue performance of DLC multi-layer coatings on steel substrate under three-point bending loading

Florian Hengsbach Dr. Kay-Peter Hoyer Prof. Dr. Mirko Schaper

F04: Mixed Ionic-Electronic Conductors: Novel Oxide Materials and Engineered Microstructures
F04.4: Session 4
Session starts at 09:15 Lecture
Anelastic and magnetic behaviour in Fe and Fe-Al alloy produced by electrodeposition from an ionic liquid

Dr. Bernd Weidenfeller Prof. Dr. Osvaldo Agustin Lambri Dr. Federico Guillermo Bonifacich Dr. Giridhar Pulletikurthi Jiayi Xu Laura Weidenfeller Prof. Dr. Frank Endres

F06: Materials Design for Electrochemical Energy Storage
F06.1: Electrode Microstructure
Session starts at 09:15 Lecture
Multiscale Characterization of Li-Ion Battery Electrodes with Correlative Electron- and X-Ray Tomography

Dr. Laura Almar Dr. Jochen Joos Janina Costard Dr. André Weber Prof. Dr. Ellen Ivers-Tiffée

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.1: Iron-Base and Steel Systems
Session starts at 09:15 Lecture
In situ determination of the ferrite grain size evolution during the cyclic austenite-ferrite phase transformation in low-alloyed steels by three-dimensional neutron depolarization

Ph.D. Haixing Fang Prof. Dr. Sybrand van der Zwaag Dr. Niels van Dijk

M02: Atomistic Methods for Designing
M02.1: Bulk Materials, Nanoparticles and Thin Films
Session starts at 09:15 Lecture
The Nature of the Pt(111)/α-Fe2O3(0001) Interface Revealed by First Principles

Ph.D. Agnes Mahmoud Pierre-Marie Deleuze Dr. Celine Dupont

P01: Manipulation of Matter by Electric and Magnetic Fields
P01.4: Session 4
Session starts at 09:15 Lecture
Effect of DC current on creep behavior of 8Y-CSZ polycrystals

Dr. Koji Morita Dr. Hidehiro Yoshida Dr. Byung-Nam Kim Dr. Keijiro Hiraga Dr. Yoshio Sakka

P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.1: Session 1
Session starts at 09:15 Lecture
Spatial Analysis of Nanostructured Au-Ag Alloys as SERS Substrates towards Increased Performance and Shelf Life

Chanunthorn Chananonnawathorn Dr. Mati Horprathum Dr. Pitak Eiamchai Saksorn Limwichean Viyapol Patthanasettakul Dr. Noppadon Nuntawong Dr. Hideki Nakajima Dr. Prayoon Songsiriritthigul Songsiriritthigul

S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.1: Process-Microstructure-Property Relations in AM Metals I
Session starts at 09:15 Lecture
In situ x-ray diffraction of a high work-hardening Ti-6Al-4V prepared by electron-beam melting

Karl Sofinowski Solange Vivès Dr. Steven Van Petegem Prof. Dr. Stéphane Godet Prof. Dr. Helena Van Swygenhoven

S06: Compositionally Complex Alloys – High Entropy Alloys
S06.4: Towards Application
Session starts at 09:15 Lecture
Microstructure-Functional Behavior-Relationships in High Entropy Shape Memory Alloys

Christian Hinte Maike Hermann David Poirunek Dr. Jan Frenzel Dr. Gregory Gerstein Dr. Mark Alan Swider Prof. Georgiy Sergeevich Firstov Prof. Gunther Eggeler

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.4: Fatigue and Failure
Session starts at 09:15 Lecture
Resistance to fatigue crack propagation in the near-threshold region in metals

Dr. Tomas Vojtek

Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.1: Session Z01 - Ch. S. P. Brühl and A. R. Boccaccini
Session starts at 09:15 Lecture
Multiphase Characterization of sellected isopleths of Cu-In-Sn system for Pb-free TLPB

Prof. Dr. Silvana Sommadossi Dr. Paula Alonso Dr. Diego Lamas Dr. Suzana Fries Silvana Tumminello

10:15
B06: Biomaterials for Bone Substitution and Regeneration
B06.1: Session 1
Session starts at 09:15 Lecture
Magnesium-based implants in an osteoporotic rat model

Dr. Nicholas Donohue Dr. Daniela Hirzberger Prof. Dr. Annelie-Martina Weinberg Ph.D. Nicole Grün

C02: Going 3D: From Image to Knowledge
C02.1: Session 1
Session starts at 09:15 Lecture
High resolution FIB nanotomography of nanoporous Au nanoparticles

Hauke Honig Prof. Dr. Peter Schaaf Dr. Dong Wang

C05: Small Scale and In Situ Mechanical Testing
C05.4: Fracture II & Indentation I
Session starts at 09:15 Lecture
Anneal hardening and high temperature strain rate sensitivity of nanostructured metals and their relation to intergranular dislocation accommodation

Dr. Oliver Renk Dr. Verena Maier-Kiener Prof. Dr. Daniel Kiener Prof. Dr. Reinhard Pippan

F02: Surface Engineering and Functionalisation
F02.1: Wear and Friction Reduction
Session starts at 09:15 Lecture
Influence of film formation preference by Direct Laser interference Patterning on Roller bearings

Chia-Jui Hsu Prof. Dr. Carsten Gachot Andreas Stratmann

F04: Mixed Ionic-Electronic Conductors: Novel Oxide Materials and Engineered Microstructures
F04.4: Session 4
Session starts at 09:15 Lecture
Influence of thermal treatments on the martensitic transformation in NiMnSb ferromagnetic shape memory alloys. Its relation to the magnetocaloric effect.

Prof. Dr. Osvaldo Lambri Dr. Federico Bonifacich Prof. Dr. Gerardo Rubiolo Dr. Pedro Ferreiros Dr. Griselda Zelada

F06: Materials Design for Electrochemical Energy Storage
F06.1: Electrode Microstructure
Session starts at 09:15 Lecture
Virtual materials design for the 3D microstructure of lithium-ion battery electrodes

Daniel Westhoff Dr. Ingo Manke Prof. Dr. Volker Schmidt

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.1: Iron-Base and Steel Systems
Session starts at 09:15 Lecture
Effect of Si on the Kinetic Stabilization of ε-Fe3(C,N)1+x in Nitrided Fe-C-Si White Cast Iron

Stefan Kante Prof. Dr. Andreas Leineweber

M02: Atomistic Methods for Designing
M02.1: Bulk Materials, Nanoparticles and Thin Films
Session starts at 09:15 Lecture
Crystallization processes in bicomponent thin film depositions: towards a realistic Kinetic Monte-Carlo simulation

Dr. Diego Martinez-Martinez Prof. Dr. Carmelo Herdes Prof. Dr. Lourdes Vega

P01: Manipulation of Matter by Electric and Magnetic Fields
P01.4: Session 4
Session starts at 09:15 Lecture
Electro-plastic deformation studies of Al-Cu eutectic alloys

Doreen Andre Matthias Obot Dr. Stefanie Sandlöbes Prof. Dr. Sandra Korte-Kerzel

S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.1: Process-Microstructure-Property Relations in AM Metals I
Session starts at 09:15 Lecture
Processing of high-strength C+N austenitic steel by selective laser melting - microstructure and properties

Johannes Boes Prof. Dr. Werner Theisen Dr. Arne Röttger

S06: Compositionally Complex Alloys – High Entropy Alloys
S06.4: Towards Application
Session starts at 09:15 Lecture
Laser Metal Deposition of Al12Co22Cr22Fe22Ni22: microstructure and texture effects on tensile properties

Oleg Stryzhyboroda Dr. Ulrike Hecht Markus Benjamin Wilms Dr. Lorenz Gerke

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.4: Fatigue and Failure
Session starts at 09:15 Lecture
Enhanced Cyclic Mechanical Properties in Ultrafine-Grained Laminated Metal Composites by Interface Engineering

Frank Kümmel Benedikt Diepold Christopher Schunk Dr. Aruna Prakash Dr. Heinz Werner Höppel Prof. Dr. Mathias Göken

Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.1: Session Z01 - Ch. S. P. Brühl and A. R. Boccaccini
Session starts at 09:15 Lecture
Potential of Photocurrent Improvement in µc-Si:H Solar Cells using ZnO:B coated Substrates Structured by Direct Laser Interference Patterning

Dr.-Ing. Marcos Soldera Prof. Dr. Kurt Taretto Dr. Jana Berger Prof. Dr. Andres-Fabian Lasagni

10:30
B06: Biomaterials for Bone Substitution and Regeneration
B06.1: Session 1
Session starts at 09:15 Lecture
treating femoral chondrosarcoma with high mechanical performances bio-hybrid bone graft: a case report

Prof. Dr. Giuseppe Perale Dr. Raimondo Piana Dr. Michele Boffano Dr. Pietro Pellegrino Dr. Nicola Ratto Dr. Laura Rossi

C02: Going 3D: From Image to Knowledge
C02.1: Session 1
Session starts at 09:15 Highlight Lecture
Cryo-FIB Tomography of Soft-Matter Functional Materials

Dr. Chandra Macauley Martina Heller Gabriel Sievi Dr. Markus Stähler Prof. Dr. Peter Wasserscheid Prof. Dr. Peter Felfer

C05: Small Scale and In Situ Mechanical Testing
C05.4: Fracture II & Indentation I
Session starts at 09:15 Lecture
Transient deformation behavior during rate-jump nanoindentation testing of glasses

René Limbach Dr. Bruno Poletto Rodrigues Prof. Dr. Lothar Wondraczek

F02: Surface Engineering and Functionalisation
F02.1: Wear and Friction Reduction
Session starts at 09:15 Lecture
In-situ XRD during Ion Implantation and Ion Etching of Austenitic Stainless Steel

Dr. Darina Manova Dr. Stephan Mändl

F04: Mixed Ionic-Electronic Conductors: Novel Oxide Materials and Engineered Microstructures
F04.4: Session 4
Session starts at 09:15 Lecture
Characterization of BaCe0.4Zr0.4Y0.2O3-δ Protonic Conductor in-operando conditions

Dr.-Ing. Catalina Jiménez Dr. Juan Basbus Dr. Mauricio Arce Dr. Federico Napolitano Dr. Martin Saleta Prof. Dr. Nikolas Bonanos Dr. Jose Alonso Dr. Maria Teresa Fernández Díaz Prof. Dr. Lars Giebeler Prof. Dr. Alberto Caneiro Prof. Dr. Adriana Serquis Prof. Dr. Liliana Mogni

F06: Materials Design for Electrochemical Energy Storage
F06.1: Electrode Microstructure
Session starts at 09:15 Lecture
Virtual design of thick electrodes for Li-Ion batteries

Dr.-Ing. Timo Danner Simon Hein Daniel Westhoff Benedikt Prifling Prof. Dr. Volker Schmidt Prof. Dr. Arnulf Latz

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.1: Iron-Base and Steel Systems
Session starts at 09:15 Lecture
Phase equilibria in the Al-Cr-Fe ternary system: experimental study and thermodynamic calculations

Maximilian Rank Dr. Peter Franke Prof. Dr. Hans Jürgen Seifert

M02: Atomistic Methods for Designing
M02.1: Bulk Materials, Nanoparticles and Thin Films
Session starts at 09:15 Lecture
Tailoring thermoelectric transport properties of two-dimensional materials

Ph.D. Leonardo Medrano Sandonas Dr. Rafael Gutierrez Dr. Alessandro Pecchia Dr. Arezoo Dianat Dr. Alexander Croy Prof. Dr. Gianaurelio Cuniberti

P01: Manipulation of Matter by Electric and Magnetic Fields
P01.4: Session 4
Session starts at 09:15 Lecture
Experimental investigation of the electro plastic effect in polycrystalline pure Mg and WE 43 alloy

Franz Körkemeyer Andrej Dalinger Dr. Gregory Gerstein Dr. Abhishek Tripathi Dr. Stefan Zaefferer

P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.1: Session 1
Session starts at 09:15 Lecture
Electrical anisotropy enhancement in W-Cu based columnar films

Ph.D. Raya El Beainou Dr. Roland SALUT Dr. Laurent ROBERT Jean-Marc COTE Dr. Valérie POTIN Prof. Dr. Nicolas MARTIN

S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.1: Process-Microstructure-Property Relations in AM Metals I
Session starts at 09:15 Lecture
High-Manganese Steels for Additive Manufacturing Applications with Energy Absorption Functionality

Patrick Köhnen Fabian Kies Simon Ewald Maximilian Voshage Prof. Dr. Johannes Heinrich Schleifenbaum Dr. Christian Haase

S06: Compositionally Complex Alloys – High Entropy Alloys
S06.4: Towards Application
Session starts at 09:15 Lecture
First results on thermal stability and mechanical behaviour of CrFeCoNi equiatomic compositionally complex alloy thin films on silicon and sapphire

Maya Katapadi Kini Wenjun Lu Alan Savan Bladine Courtois Younes Addab Benjamin Breitbach Dominique Chatain Alfred Ludwig Nathalie Bozzolo Christian Liebscher Christina Scheu Christoph Kirchlechner Gerhard Dehm

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.4: Fatigue and Failure
Session starts at 09:15 Lecture
Strategy of multiple crack deflection at tailored interfaces for damage tolerant materials

Prof. Dr. Rostislav Daniel Michael Meindlhumer Dr. Jakub Zalesak Bernhard Sartory Prof. Dr. Christian Mitterer Prof. Dr. Jozef Keckes

Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.1: Session Z01 - Ch. S. P. Brühl and A. R. Boccaccini
Session starts at 09:15 Lecture
Multiscale homogenization scheme for transport phenomena in cement-based composites under self-healing conditions

Dipl.-Ing. Felipe Lopez Rivarola Prof. Dr. Guillermo Etse Prof. Dr. Paula Folino Prof. Dr. Eduardus Koenders Dr. Antonio Caggiano Dr. Diego Said Schicchi

10:45
Y: Breaks Coffee Break
Coffee Break
11:15
B06: Biomaterials for Bone Substitution and Regeneration
B06.2: Session 2
Session starts at 11:15 Lecture
Novel Degradable Strontium Releasing Biomaterials for Treatment of Osteoporotic Bone Defects

Benjamin Kruppke Dr. Alena Svenja Wagner Dr. Seemun Ray Dr. Christiane Heinemann Niels Döhner Dr. Marcus Rohnke Prof. Dr. Volker Alt Prof. Dr. Sabine Wenisch Dr. Thomas Hanke

C02: Going 3D: From Image to Knowledge
C02.2: Session 2
Session starts at 11:15 Keynote Lecture
Automated damage analysis in DP steels using neural networks

Prof. Dr. Sandra Korte-Kerzel Dr. Ulrich Kerzel Tom Reclik Carl Kusche Dr. Talal Al-Samman

C05: Small Scale and In Situ Mechanical Testing
C05.5: Indentation II
Session starts at 11:15 Lecture
High temperature flow behavior of ultra-strong nanoporous Au assessed by spherical nanoindentation

Dipl.-Ing. Alexander Leitner Dr. Verena Maier-Kiener Dr. Daniel Kiener

F02: Surface Engineering and Functionalisation
F02.2: Nanomaterials and Nanostructuring
Session starts at 11:15 Lecture
Porous silicon nanowires decorated by silver nanoparticles for efficient hydrogen generation

Dr. Vladimir Sivakov Tingsen Ming Dr. Sergey Turishchev

F06: Materials Design for Electrochemical Energy Storage
F06.2: Electrode and Cell Simulation
Session starts at 11:15 Keynote Lecture
Spatially resolved modeling and simulation of degradation in Lithium ion batteries

Prof. Dr. Arnulf Latz Simon Hein Fabian Single Dr. Birger Horstmann

F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.1: Anisotropy and Modelling
Session starts at 11:15 Keynote Lecture
Properties of grain boundaries in metals and ceramics and their influence on grain growth

Prof. Dr. Gregory Rohrer

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.2: Key Ternary Systems
Session starts at 11:15 Lecture
Three-dimensional Co-Ni-Ti phase diagram: measurement and modeling

Prof. Dr. Yong Du Dr. Li Han Dr. Zhou Peng Dr. Zeng Yinping Dr. Jiang Heng Prof. Dr. Yu Peng

M02: Atomistic Methods for Designing
M02.2: Cellular and Granular Porous Microstructures
Session starts at 11:15 Lecture
Virtual materials testing for investigating the relationship between morphology and permeability of open-cell foams

Daniel Westhoff Dr. Jakub Skibinski Dr. Ondrej Sedivy Bartlomiej Wysocki Prof. Dr. Tomasz Wejrzanowksi Prof. Dr. Volker Schmidt

P08: Damage in Metal Forming
P08.1: Session 1
Session starts at 11:15 Highlight Lecture
Deformation characterization in blanking of thin electrical steels

Dr. Hassan Ghadbeigi Ammar Al-Rubaye

S02: Experiments and Simulations Towards Understanding Tribology Across Length-Scales
S02.1: Materials Tribology
Session starts at 11:15 Keynote Lecture
Recent Progress in Tribological Models

Prof. Daniele Dini

S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.2: Process-Microstructure-Property Relations in AM Metals II
Session starts at 11:15 Highlight Lecture
Additive Manufacture of Ta-Mo-Ti-Al multi-principal element alloy

Dr. Andrey Molotnikov Dr. Daniel Schliephake Prof. Xinhua Wu

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.5: Mechanical Properties of Tungsten
Session starts at 11:15 Keynote Lecture
Micromechanical Modeling of Fatigue Crack Initiation and Early Stages of Short Crack Growth

Prof. Dr. Alexander Hartmaier Dr. Hamad ul Hassan Dr. Martin Boeff

S08: Advanced Steels
S08.1: INCROHSS Seminar: Intercritical Rolling of High Strength Steels
Session starts at 11:15 Keynote Lecture
Intercritical rolling of heavy-gauge structural plates: which compromise between strength and toughness?

Dr.-Ing. Matteo Caruso Dr. Ulrike Lorenz Dr. Tuan Nguyen Minh Prof. Dr. Pello Uranga Unai Mayo Nerea Isasti Prof. Roumen Petrov

Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.2: Session Z02 - Ch. R. Arce and F. Soldera
Session starts at 11:15 Lecture
Characterization of austenite grain size refinement in quench and tempered material for oil and gas applications

Ph.D. Martin Valdez Dr. Maria Jose Cancio Dr. Gonzalo Gomez Dr. Flavio Soldera

11:30
B06: Biomaterials for Bone Substitution and Regeneration
B06.2: Session 2
Session starts at 11:15 Lecture
Fe-Fe2O3 nanocomposites as biodegradable load-bearing material in medical implants

Aliya Sharipova Prof. Sergey Psakhie Prof. Irena Gotman Prof. Elazar Gutmanas

C05: Small Scale and In Situ Mechanical Testing
C05.5: Indentation II
Session starts at 11:15 Highlight Lecture
On Extracting Mechanical Properties from Nanoindentation at Temperatures up to 1000˚C

Dr. James Gibson Sebastian Schröders Christoffer Zehnder Prof. Sandra Korte-Kerzel

F02: Surface Engineering and Functionalisation
F02.2: Nanomaterials and Nanostructuring
Session starts at 11:15 Lecture
Study on the oxidation grade of reduced graphene oxide based composites: synthesis, characterization and applications

Prof. Dr. Donovan Diaz-Droguett Prof. Dr. Gustavo Morales Martin Roble Camilo Acuña Camila Chamorro Maximiliano Zensich

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.2: Key Ternary Systems
Session starts at 11:15 Lecture
Electromotive force and calorimetric study of Li-Pb-Sb alloys

Dr.-Ing. Przemyslaw Fima Sylwia Terlicka

M02: Atomistic Methods for Designing
M02.2: Cellular and Granular Porous Microstructures
Session starts at 11:15 Lecture
Detailed and simplified numerical prediction of the pressure drop of non-Darcy flow through open-cell foams

Eric Werzner Prof. Dr. Subhashis Ray Cornelius Demuth

P08: Damage in Metal Forming
P08.1: Session 1
Session starts at 11:15 Lecture
Investigation of ductility and damage characteristics of EN AW-5182 H18 at non-isothermal forming conditions

Alan Camberg Prof. Dr. Thomas Tröster Dr. Friedrich Bohner Dr. Nikolay Sotirov Dr. Jörn Tölle

S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.2: Process-Microstructure-Property Relations in AM Metals II
Session starts at 11:15 Lecture
Failure mechanisms and damage tolerance of cellular structures produced by additive manufacturing techniques

Prof. Dr.-Ing. Thomas Niendorf Daniel Patrick Kotzem Jochen Tenkamp Prof. Dr. Frank Walther Dipl.-Ing. Florian Brenne

Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.2: Session Z02 - Ch. R. Arce and F. Soldera
Session starts at 11:15 Lecture
Corrosion and wear properties of plasma nitrided 316L stainless steel

Prof. Dr. Sonia Brühl Prof. Dr. Silvia Simison Dr. Lisandro Escalada Dr. Darina Manova Dr. Stephan Maendl Laura Vaca Dr. Flavio Soldera Dr. M. Agustina Guitar

11:45
B06: Biomaterials for Bone Substitution and Regeneration
B06.2: Session 2
Session starts at 11:15 Lecture
Effect of the cooling rate on physicochemical properties of tricalcium phosphate and derived calcium phosphate cement

Dipl.-Ing. Daniel Moreno Duarte Prof. Dr. María Esperanza López Gómez Dr. Fabio Vargas Galvis

C02: Going 3D: From Image to Knowledge
C02.2: Session 2
Session starts at 11:15 Lecture
A new Image Segmentation Tool powered by Machine Learning

Tobias Volkenandt Stefanie Freitag Dr. Michael Rauscher

C05: Small Scale and In Situ Mechanical Testing
C05.5: Indentation II
Session starts at 11:15 Lecture
Nanomechanical mapping for individual phase performance as a function of environment

Dr. Ude Dirk Hangen Dr. Eric Hintsala Dr. Douglas Stauffer

F02: Surface Engineering and Functionalisation
F02.2: Nanomaterials and Nanostructuring
Session starts at 11:15 Lecture
Influence of mechanical and thermal loads on defined surface modifications

Dipl.-Ing. Rebecca Strunk Prof. Dr. Brigitte Clausen Florian Borchers Prof. Dr. Carsten Heinzel

F06: Materials Design for Electrochemical Energy Storage
F06.2: Electrode and Cell Simulation
Session starts at 11:15 Lecture
Stochastic microstructure modeling of aggregate particles in hierarchically structured electrodes

Matthias Neumann Sven Wetterauer Markus Osenberg Dr. André Hilger Dr. Amalia Wagner NIcole Bohn Dr. Joachim Binder Dr. Ingo Manke Dr. Thomas Carraro Prof. Dr. Volker Schmidt

F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.1: Anisotropy and Modelling
Session starts at 11:15 Highlight Lecture
Reverse engineering the kinetics of grain growth

Prof. Carl E. Krill Mingyan Wang Jules M. Dake Dr. Søren Schmidt

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.2: Key Ternary Systems
Session starts at 11:15 Lecture
Enthalpy of mixing of liquid Ag-Li-Sb alloys.

Monika Bugajska Dr. Siegfried Fürtauer Prof. Hans Flandorfer Prof. Przemyslaw Fima

M02: Atomistic Methods for Designing
M02.2: Cellular and Granular Porous Microstructures
Session starts at 11:15 Lecture
Scalebridging modeling approach for the prediction of capillary driven flows in diagnostic membranes

Patrick Altschuh Dr. Marcel Bremerich Dr. Annette Reiche Andreas Reiter Dr. Michael Selzer Prof. Dr. Britta Nestler

P08: Damage in Metal Forming
P08.1: Session 1
Session starts at 11:15 Lecture
The effect of forming-induced damage on fatigue properties of 16MnCrS5 steels

Lisa Samfaß Prof. Dr. Frank Walther

P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.2: Session 2
Session starts at 11:15 Lecture
Crystallinity and texture of nanostructured Mo thin films deposited obliquely at room temperature

Susann Liedtke-Grüner Christoph Grüner Dr. Juergen W. Gerlach Michael Mensing Philipp Schumacher Dr. Andriy Lotnyk Prof. Dr. Bernd Rauschenbach

S02: Experiments and Simulations Towards Understanding Tribology Across Length-Scales
S02.1: Materials Tribology
Session starts at 11:15 Lecture
Towards understanding fracture initiation in nanotribology

Dr. Wenzhen Xia Dr. Steffen Brinckmann Prof. Dr. Gerhard Dehm

S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.2: Process-Microstructure-Property Relations in AM Metals II
Session starts at 11:15 Lecture
Microstructure and mechanical properties of additively manufactured IN718 after different heat treatments

Benedikt Diepold Dr. Steffen Neumeier Prof. Mathias Göken Martin Pröbstle

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.5: Mechanical Properties of Tungsten
Session starts at 11:15 Lecture
The brittle-to-ductile transition in cold rolled tungsten: Low-temperature toughness opens a new era in industrial application of tungsten

Carsten Bonnekoh Dr. Jan Hoffmann Dr. Andreas Hoffmann Dr. Jens Reiser

S08: Advanced Steels
S08.1: INCROHSS Seminar: Intercritical Rolling of High Strength Steels
Session starts at 11:15 Lecture
Advanced EBSD study of deformation mechanisms during single pass intercritical rolling

Dipl.-Ing. Ulrike Lorenz Dr. Melanie Gauvin

Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.2: Session Z02 - Ch. R. Arce and F. Soldera
Session starts at 11:15 Lecture
Electrospun polymer matrices for drug delivery and tissue engineering applications

Prof. Dr. Gustavo Abraham Matthäus Popov Max Meuter Agustina Massone Dr. Guadalupe Rivera Dr. Agustina Aldana Dr. Liliana Liverani Prof. Dr. Aldo R. Boccaccini

12:00
C02: Going 3D: From Image to Knowledge
C02.2: Session 2
Session starts at 11:15 Lecture
Machine learning as a tool for quantification and evaluation of micrographs

Andreas Jansche Prof. Dr. Gerhard Schneider Prof. Dr. Ricardo Büttner Dr. Timo Bernthaler Hermann Baumgartl Andreas Kopp David Vogelgsang Florian Trier Amit-Kumar Choudhary Olatomiwa Badmos

C05: Small Scale and In Situ Mechanical Testing
C05.5: Indentation II
Session starts at 11:15 Lecture
Metallic Nanoimprinting – Nanoscale surface structuring by confined plastic deformation

Paul Braun Prof. Dr. Karsten Durst Christopher Schmidt

F02: Surface Engineering and Functionalisation
F02.2: Nanomaterials and Nanostructuring
Session starts at 11:15 Lecture
Heat Exchange Structures Based on Copper/CNT Composite

Dr.-Ing. André Schlott Thomas Hutsch Dr. Silke Hampel Dr. Thomas Weißgärber Prof. Dr. Jens Meinert Prof. Dr. Bernd Kieback

F06: Materials Design for Electrochemical Energy Storage
F06.2: Electrode and Cell Simulation
Session starts at 11:15 Lecture
Simulation of interparticle phase separation in lithium-ion battery electrodes

Dr. Thomas Carraro Sven E. Wetterauer

F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.1: Anisotropy and Modelling
Session starts at 11:15 Highlight Lecture
Missing Variables in Grain Growth

Dr. Daniel Lewis Dr. Catherine Bishop

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.2: Key Ternary Systems
Session starts at 11:15 Lecture
Experimental investigation and thermodynamic modelling of the Al–Mn–Ni system

Dipl.-Ing. Alexander Walnsch Dr. Mario Kriegel Dr. Olga Fabrichnaya Prof. Dr. Andreas Leineweber

M02: Atomistic Methods for Designing
M02.2: Cellular and Granular Porous Microstructures
Session starts at 11:15 Lecture
Flow behaviour through reconstructed soil granular structures and characterization by their hydraulic properties.

Andres Abad Pavan Veluvali Prof. Dr. Britta Nestler Dr. Michael Selzer Dr. Aron Kneer

P08: Damage in Metal Forming
P08.1: Session 1
Session starts at 11:15 Lecture
Overview of microstructural analysis methods for the characterization of damage in forming processes

Dr. Gregory Gerstein Florian Gutknecht Dr. Till Clausmeyer Dr. Florian Nürnberger

P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.2: Session 2
Session starts at 11:15 Lecture
NIR optofluidics with porous 1D photonic structures prepared by deposition at oblique angles

Prof. Dr. Augustin R. González-Elipe Aurelio García-Valenzuela Dr. Rafael Alvarez-Molina Prof. Juan Pedro Espinós Dr. Victor Rico Dr. Jorge Gil-Rostra Dr. Alberto Palmero

S02: Experiments and Simulations Towards Understanding Tribology Across Length-Scales
S02.1: Materials Tribology
Session starts at 11:15 Lecture
Analysis of the tribological conditions in grinding of polycrystalline diamond based on single-grain friction tests using the pin-disk principle

Frederik Vits Dr. Daniel Trauth Dr. Patrick Mattfeld Prof. Dr. Fritz Klocke

S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.2: Process-Microstructure-Property Relations in AM Metals II
Session starts at 11:15 Lecture
On the evolution of microstructure of LBM-processed H13 tool steel upon heat treatment

Liang Wu Fengchen Xia Witalij Gridin Dr. Leuders Stefan Prof. Dr. Thomas Niendorf

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.5: Mechanical Properties of Tungsten
Session starts at 11:15 Lecture
Thermal stability of warm-rolled tungsten in the temperature range from 1150 °C to 1300 °C

Dipl.-Ing. Umberto Maria Ciucani Dr. Wolfgang Pantleon

S08: Advanced Steels
S08.1: INCROHSS Seminar: Intercritical Rolling of High Strength Steels
Session starts at 11:15 Lecture
Microstructural characterization procedure using EBSD technique for intercritically deformed low carbon steels

Ph.D. Unai Mayo Ijurra Dr. Nerea Isasti Gordobil Dr. Pello Uranga Zuaznabar Prof. Dr. Jose María Rodriguez Ibabe

Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.2: Session Z02 - Ch. R. Arce and F. Soldera
Session starts at 11:15 Lecture
Controlling adhesion of pathogen bacteria using laser textured surfaces

Dr. Eduardo Favret Dr. Lorena Setten Darío Mintzer Dr. Florian Roessler Prof. Dr. Andrés Lasagni Dr. Adrian Canzian

12:15
C02: Going 3D: From Image to Knowledge
C02.2: Session 2
Session starts at 11:15 Lecture
3D characterization of dendritic microstructures and the evolution of crystal mosaicity in Ni-base superalloys

Felicitas Scholz Daniel Kotzem Mustafa Cevik Pascal Thome Prof. Dr. Jürgen Schreuer Prof. Dr. Ingo Steinbach Dr. Jan Frenzel Prof. Dr. Gunther Eggeler

C05: Small Scale and In Situ Mechanical Testing
C05.5: Indentation II
Session starts at 11:15 Lecture
Parameterization of a nonlocal crystal plasticity model for lath martensite using nanoindentation

Jenni Kristin Engels Prof. Alexander Hartmaier Dr. Napat Vajragupta

F02: Surface Engineering and Functionalisation
F02.2: Nanomaterials and Nanostructuring
Session starts at 11:15 Lecture
4-beam Direct Laser Interference Patterning – a tool to draw colorful pictures without paint

Dr. Bogdan Voisiat Max Holzey Andreas Rank Valentin Lang Prof. Dr. Andrés Fabián Lasagni

F06: Materials Design for Electrochemical Energy Storage
F06.2: Electrode and Cell Simulation
Session starts at 11:15 Lecture
Microstructural cathode design of lithium-ion batteries and its impact on the effective electronic and ionic conductivity using discrete element methods

Oleg Birkholz Prof. Dr. Marc Kamlah Dr. Yixiang Gan

F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.1: Anisotropy and Modelling
Session starts at 11:15 Lecture
Kinetic Wulff Shape: Effect of Interface Anisotropy on Grain Boundary Migration

Dr. John Blendell David Lowing Matthew Michie Prof. Wolfgang Rheinheimer Prof. Carol Handwerker

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.2: Key Ternary Systems
Session starts at 11:15 Lecture
Phase equilibria and quenched phases in the Al-rich region of the ternary Al–Mo–Ti system

Dr.-Ing. Mario J. Kriegel Benedikt Distl Prof. Dr. Jens Freudenberger Dr. Olga Fabrichnaya Prof. Dr. Andreas Leineweber

M02: Atomistic Methods for Designing
M02.2: Cellular and Granular Porous Microstructures
Session starts at 11:15 Lecture
Simulation of Stresses in Cellular and Porous Microstructures

Dr.-Ing. Karl-Michael Nigge Philipp Schumann Dr. Johannes Fieres Dr. Christof Reinhart

P08: Damage in Metal Forming
P08.1: Session 1
Session starts at 11:15 Lecture
A comparative study on Damage evolution of two different DP1000 steel sheets

Niloufar Habibi Dr. Victoria Brinnel Prof. Dr. Sebastian Münstermann

P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.2: Session 2
Session starts at 11:15 Lecture
Comparative study of the transmittance and scattering behavior of continuously graded antireflective coatings and multiple discrete nanostructured layers deposited by Oblique Angle Deposition

Florian Maudet Dr. Bertrand Lacroix Dr. Maxime Paraillous Antonio J. Santos Prof. Thierry Girardeau Dr. Cyril Dupeyrat Dr. Rafael Garcia Prof. Fransisco M Morales Dr. Fabien Paumier

S02: Experiments and Simulations Towards Understanding Tribology Across Length-Scales
S02.1: Materials Tribology
Session starts at 11:15 Lecture
How normal load influences the microstructure evolution in copper under reciprocating tribological loading

Friederike Ruebeling Dr. Gunther Richter Prof. Dr. Peter Gumbsch Dr. Christian Greiner

S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.2: Process-Microstructure-Property Relations in AM Metals II
Session starts at 11:15 Lecture
Micro-mechanical modelling of additively manufactured 316L stainless steel using selective laser melting

Abhishek Biswas Mahesh Prasad Dr. Napat Vajragupta Dr. Hamad ul Hassan Florian Brenne Prof. Dr. Thomas Niendorf Prof. Dr. Alexander Hartmaier

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.5: Mechanical Properties of Tungsten
Session starts at 11:15 Lecture
Tungsten (W): from the bulb wire to a structural material

Dr. Jens Reiser Simon Bonk Carsten Bonnekoh Philipp Lied Dr. Andreas Hoffmann

S08: Advanced Steels
S08.1: INCROHSS Seminar: Intercritical Rolling of High Strength Steels
Session starts at 11:15 Lecture
Analysis of the microstructural evolution of a intercritically deformed NbV microalloyed steel

Dr.-Ing. Nerea Isasti Gordobil Unai Mayo Ijurra Dr. Pello Uranga Zuaznabar Prof. Dr. Jose María Rodriguez Ibabe

Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.2: Session Z02 - Ch. R. Arce and F. Soldera
Session starts at 11:15 Lecture
Enhancing electrochemical and bioactive performance of magnesium WE43 alloy with chitosan/silica/bioglass EPD coatings for temporary implants

Dr.-Ing. Josefina Ballarre Joan Franco Gagliardo Prof. Dr. Silvia Cere Prof. Dr. Aldo Boccaccini

12:30
C02: Going 3D: From Image to Knowledge
C02.2: Session 2
Session starts at 11:15 Lecture
3D-characterization of deuterium distributions in oxides on Zircaloy-4 using NanoSIMS

Dr. Kexue Li Dr. Thomas Aarholt Junliang Liu Dr. Helen Hulme Dr. Alistair Garner Prof. Dr. Michael Preuss Prof. Dr. Sergio Lozano-Perez Prof. Dr. Chris Grovenor

C05: Small Scale and In Situ Mechanical Testing
C05.5: Indentation II
Session starts at 11:15 Lecture
Indentation size effect in tungsten single crystals

Jin Wang Tillmann Volz Prof. Dr. Sabine M. Weygand Dr. Ruth Schwaiger

F02: Surface Engineering and Functionalisation
F02.2: Nanomaterials and Nanostructuring
Session starts at 11:15 Lecture
Integration of sonication as a dispersion method in an extrusion process

Benjamin Mohr Thomas Gries

F06: Materials Design for Electrochemical Energy Storage
F06.2: Electrode and Cell Simulation
Session starts at 11:15 Lecture
Chemo-mechanical analysis of inverse opal structures for use in electrodes of Lithium-ion batteries

Dr.-Ing. Peter Stein Prof. Dr. Bai-Xiang Xu

F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.1: Anisotropy and Modelling
Session starts at 11:15 Highlight Lecture
Solid State Sintering: A Phase-field approach

Dr. Johannes Hötzer Marco Seiz Michael Kellner Prof. Dr. Wolfgang Rheinheimer Prof. Dr. Britta Nestler

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.2: Key Ternary Systems
Session starts at 11:15 Lecture
Thermodynamics and Microstructure of Liquid-Phase-Sintered Molybdenum

Andrea Huber Prof. Dr. Lorenz Sigl Dr. Bernhard Tabernig Prof. Dr. Bernd Kieback

M02: Atomistic Methods for Designing
M02.2: Cellular and Granular Porous Microstructures
Session starts at 11:15 Lecture
Multiphase-field simulation of coarsening in an SOFC-anode under surface and grain boundary self-diffusion

Paul Hoffrogge Dr. Daniel Schneider Prof. Dr. Britta Nestler Patricia Haremski Dr. Matthias Wieler Dr. Piero Lupetin

P08: Damage in Metal Forming
P08.1: Session 1
Session starts at 11:15 Lecture
Statistically relevant in-situ damage analysis in DP steel – an automated approach via machine learning

Carl F. Kusche Martina Freund Tom Reclik Dr. Ulrich Kerzel Dr. Talal Al-Samman Prof. Dr. Sandra Korte-Kerzel

P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.2: Session 2
Session starts at 11:15 Lecture
Sputtering and GLAD: Predicting the column tilt angle

Dr.-Ing. Aurelien Besnard

S02: Experiments and Simulations Towards Understanding Tribology Across Length-Scales
S02.1: Materials Tribology
Session starts at 11:15 Lecture
Subsurface Dislocations Activity under Frictional Sliding: A Discrete Dislocation Analysis

Dr. Yilun Xu Prof. Dr. Daniele Dini Dr. Daniel Balint

S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.2: Process-Microstructure-Property Relations in AM Metals II
Session starts at 11:15 Lecture
Mechanical properties of nano structured eutectic NiAl-Cr(Mo) in-situ composites processed by additive manufacturing

Andreas Förner Sven Giese Dr. Steffen Neumeier Prof. Dr. Peter Felfer Prof. Dr. Carolin Körner Prof. Dr. Mathias Göken

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.5: Mechanical Properties of Tungsten
Session starts at 11:15 Lecture
How to get away with tungsten – lessons learned on improving its mechanical properties

Dr. Stefan Wurster Vladica Nikolic Dr. Daniel Scheiber Dr. Hong Li Dr. Lorenz Romaner Dr. Bernd Gludovatz Prof. Dr. Reinhard Pippan

S08: Advanced Steels
S08.1: INCROHSS Seminar: Intercritical Rolling of High Strength Steels
Session starts at 11:15 Lecture
Texture evolutions in heavy gauge steel plates after inter-critical rolling at high temperatures

Dr. Minh Tuan Nguyen Dr. Matteo Caruso Dr. Ulrike Lorenz Prof. Dr. Jilt Sietsma Prof. Dr. Roumen Petrov

Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.2: Session Z02 - Ch. R. Arce and F. Soldera
Session starts at 11:15 Lecture
Engineering Li-delivering bioactive glass-ceramic scaffolds for regenerative medicine

Prof. Dr. Aldo R. Boccaccini Dr. Luis Haro Durand, Valentina Miguez-Pacheco Dr. Alejandro Gorustovich

12:45
Y: Breaks Lunch Break
Lunch Break
14:00
L: Plenary Lectures Plenary Lecture
Segregation and Transformation at Lattice Defects as Microstructure Design Toolbox

Prof. Dr. Dierk Raabe

14:30
Y: Breaks Time to change the room
Time to change the room
14:45
B06: Biomaterials for Bone Substitution and Regeneration
B06.3: Session 3
Session starts at 14:45 Lecture
Bioresorbable Mg-based screws for osteosynthesis in a juvenile ovine model

Dr. Nicholas Donohue Dr. Johannes Eichler Prof. Dr. Annelie-Martina Weinberg Ph.D. Nicole Grün

C02: Going 3D: From Image to Knowledge
C02.3: Session 3
Session starts at 14:45 Keynote Lecture
Understanding hindered diffusion in porous networks combining electron tomography and pore-scale simulations

Dr. Christian Kübel Stefan-Johannes Reich Artur Svidrytski Dzmitry Hlushkou Dr. Daniela Stoeckel Dr. Alexandra Höltzel Prof. Ulrich Tallarek

C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.1: Session 1
Session starts at 14:45 Keynote Lecture
Characterization of metal microstructures in 3D and 4D

Prof. Dr. Dorte Juul Jensen

C05: Small Scale and In Situ Mechanical Testing
C05.6: Interfaces
Session starts at 14:45 Highlight Lecture
Nano-to-meso theoretical and experimental study of mechanical properties of Fe-Al-Ti superalloys

Dr. Martin Friak Prof. Vilma Bursikova Dr. Nadezda Pizurova Dr. Petr Dymacek Dr. Ferdinand Dobes Prof. David Holec Dr. Yvonna Jiraskova Prof. Dr. Mojmir Sob

F02: Surface Engineering and Functionalisation
F02.3: Corrosion and Wear Protection Control
Session starts at 14:45 Highlight Lecture
Corrosion and properties of low temperature plasma carburized austenitic stainless steel

Ph.D. Lisandro Escalada Ana Sofía Gasco Dr. Sonia Brühl Dr. Flavio Soldera Katherine Aristizabal Dr. Gregory Marcos Dr. Cedric Noel Prof. Thierry Czerwiec Dr. Silvia Simison

F06: Materials Design for Electrochemical Energy Storage
F06.3: Processing Aspects
Session starts at 14:45 Lecture
Tailored Electrodes for high Energy Lithium-Ion-Batteries

Manuel Weller Marius Bolsinger Simon Ruck Prof. Dr. Harald Riegel Prof. Dr. Volker Knoblauch

F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.2: Segregation and Space Charge
Session starts at 14:45 Keynote Lecture
Solute Drag versus Solute Acceleration and Microstructural Evolution of Alumina

Prof. Wayne Kaplan Ruth Moshe

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.3: Ceramic Materials
Session starts at 14:45 Lecture
Energetics and phase stabilities in the ZrO2-YTaO4 quasibinary

Dr.-Ing. Maren Lepple Dr. Kristina Lilova Dr. Sergey V. Ushakov Can Agca Dr. Chandra A. Macauley Abel N. Fernandez Prof. Dr. Carlos G. Levi Prof. Dr. Alexandra Navrotsky

M07: Modeling and Process Simulation of Fiber-Reinforced Polymers
M07.1: Modeling FRP on Micro Scale
Session starts at 14:45 Lecture
A revisit of Jeffery’s equation – modeling fiber suspensions with Smoothed Particle Hydrodynamics (SPH)

Nils Meyer Oleg Saburow Martin Hohberg Prof. Andrew Hrymak Prof. Dr. Frank Henning Dr. Luise Kärger

M08: Integrated Computational Materials Engineering (ICME)
M08.1: Description of Materials and Properties
Session starts at 14:45 Highlight Lecture
Using machine learning methods to homogenise damage from micro- to macroscale

Denise Reimann Dr. Hamad ul Hassan Prof. Dr. Tobias Glasmachers Prof. Dr. Alexander Hartmaier

P08: Damage in Metal Forming
P08.2: Session 2
Session starts at 14:45 Highlight Lecture
New biaxially loaded specimens under non-proportional loading: Damage and fracture

Dr. Steffen Gerke Moritz Zistl Prof. Dr. Michael Brünig

S02: Experiments and Simulations Towards Understanding Tribology Across Length-Scales
S02.2: Third Body Formation
Session starts at 14:45 Lecture
Consequences of surface texturing on third body flows during fretting tests

Dr. Sylvie Descartes Dr. Guilhem Mollon Dr. Yinyin Zhang

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.6: Micromechanics
Session starts at 14:45 Keynote Lecture
Role of the subgrain structure in superelastic NiTi: HRDIC and synchrotron X-ray diffraction during multiaxial loading

Prof. Dr. Helena Van Swygenhoven Wei-Neng Hsu Dr. Miroslav Smid Dr. Steven Van Petegem Dr. Efthymios Polatidis

S08: Advanced Steels
S08.2: Stainless Steels
Session starts at 14:45 Keynote Lecture
Initial microstructure effect on surface relief and fatigue crack initiation in a high strength ferritic-martensitic steel.

Prof. Dr. Iris Alvarez Dr. Maria Natalia Batista Dr. Maria Cecilia Marinelli

15:00
B06: Biomaterials for Bone Substitution and Regeneration
B06.3: Session 3
Session starts at 14:45 Lecture
Optimizing tribological and biological behavior of UHMWPE hip imlant liners with incorporation of zirconia, GNP and HAp nanoparticles

Sara Mohseni Taromsari Meysam Salari Prof. Dr. Reza Bagheri

C05: Small Scale and In Situ Mechanical Testing
C05.6: Interfaces
Session starts at 14:45 Lecture
Anisotropy of fracture toughness of nanostructured materials controlled by grain boundary design

Prof. Dr. Rostislav Daniel Michael Meindlhumer Dr. Juraj Todt Walter Baumegger Prof. Dr. Christian Mitterer Prof. Dr. Jozef Keckes

F02: Surface Engineering and Functionalisation
F02.3: Corrosion and Wear Protection Control
Session starts at 14:45 Lecture
Development of a post oxidizing process over nitrided medium alloy steels for wear and corrosion protection in oil sucker rod lift

Dipl.-Ing. Pablo Cirimello Dr. Sonia Brühl Dr. Eugenia Dalibón Dr. Amado Cabo Alberto Aguirre Guillermo Carfi

F06: Materials Design for Electrochemical Energy Storage
F06.3: Processing Aspects
Session starts at 14:45 Lecture
Challenges in Lithium-Ion Battery Electrode-Processing using Nanostructured LiNi0.33Co0.33Mn0.33O2

Dr. Marcus Müller Nicole Bohn Dr. Werner Bauer Dr. Joachim R. Binder

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.3: Ceramic Materials
Session starts at 14:45 Lecture
The MgO-TiO2 and Al2O3-MgO-TiO2 system: experiments and thermodynamic assessment

Dipl.-Ing. Mariia Ilatovskaia Ivan Saenko Galina Savinykh Dr. Olga Fabrichnaya

M07: Modeling and Process Simulation of Fiber-Reinforced Polymers
M07.1: Modeling FRP on Micro Scale
Session starts at 14:45 Lecture
Curing simulations on the basis of a phase-field model

Felix Schwab Lukas Schöller Dr. Daniel Schneider Prof. Colin Denniston Prof. Dr. Britta Nestler

M08: Integrated Computational Materials Engineering (ICME)
M08.1: Description of Materials and Properties
Session starts at 14:45 Lecture
Micromechanical Modelling of Fatigue Crack Initiation in Martensitic High Strength Steels

Benjamin Schäfer Dr. Petra Sonnweber-Ribic Xiaochen Song Dr. Hamad ul Hassan Prof. Dr. Alexander Hartmaier

P08: Damage in Metal Forming
P08.2: Session 2
Session starts at 14:45 Lecture
Implementation of a modified Orowan criterion into a Gurson model to numerically predict transition behavior of High-Strength Low-Alloy steels (HSLA)

Julius Langenberg Dr. Victoria Brinnel Prof. Dr. Sebastian Münstermann

S02: Experiments and Simulations Towards Understanding Tribology Across Length-Scales
S02.2: Third Body Formation
Session starts at 14:45 Lecture
Debris formation in adhesive wear with multi-asperity interactions

Dr.-Ing. Tobias Brink Lucas Frérot Prof. Jean-François Molinari

15:15
B06: Biomaterials for Bone Substitution and Regeneration
B06.3: Session 3
Session starts at 14:45 Lecture
Design and development of functional silica based glassy bioactive materials with antibacterial properties

Dr. Isabel Gonzalo de Juan Dr. Emanuel Ionescu Fangtong Xie Prof. Dilshat Tulyaganov Prof. Ralf Riedel

C02: Going 3D: From Image to Knowledge
C02.3: Session 3
Session starts at 14:45 Lecture
Calculating the Tortuosity of Porous Electrodes Based on Tomography Data

Dr. Jochen Joos Dr. Thomas Carraro Sven Wetterauer Dr. André Weber Prof. Ellen Ivers-Tiffée

C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.1: Session 1
Session starts at 14:45 Lecture
Influence of focused ion beam sample preparation on the microstructure of zirconia

Dr. Harry Berek Prof. Dr. Christos G. Aneziris

C05: Small Scale and In Situ Mechanical Testing
C05.6: Interfaces
Session starts at 14:45 Lecture
Depth profiles of chemical and mechanical properties through thermally degraded CFRP

Tanja Vetter Prof. Dr. Sebastian Eibl Prof. Dr. Hans-Joachim Gudladt

F06: Materials Design for Electrochemical Energy Storage
F06.3: Processing Aspects
Session starts at 14:45 Lecture
Investigating the relationship between compaction load and the 3D microstructure of cathodes in lithium-ion batteries

Benedikt Prifling Klaus Kuchler Denny Schmidt Dr. Henning Markötter Dr. Ingo Manke Prof. Dr. Volker Knoblauch Prof. Dr. Volker Schmidt

F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.2: Segregation and Space Charge
Session starts at 14:45 Lecture
Grain growth transition in SrTiO3: Bimodal microstructures, space charge and the impact of dopants

Prof. Wolfgang Rheinheimer Prof. Michael Hoffmann

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.3: Ceramic Materials
Session starts at 14:45 Lecture
Thermodynamic modeling and experimental investigation of a self-healing SiCf/SiCN CMC

Ingo Markel Dr. Martin Steinbrück Jürgen Glaser Prof. Dr. Hans Jürgen Seifert

M07: Modeling and Process Simulation of Fiber-Reinforced Polymers
M07.1: Modeling FRP on Micro Scale
Session starts at 14:45 Lecture
Phase-field pull-out simulations on fibre-reinforced polymers

Lukas Schöller Felix Schwab Ephraim Schoof Christoph Herrmann Dr. Daniel Schneider Prof. Dr. Britta Nestler

M08: Integrated Computational Materials Engineering (ICME)
M08.1: Description of Materials and Properties
Session starts at 14:45 Lecture
Crystal plasticity finite element method calculation of formability limit diagram

Dr.-Ing. Duancheng Ma

P08: Damage in Metal Forming
P08.2: Session 2
Session starts at 14:45 Highlight Lecture
Damage evolution of high-strength multiphase steels and its influence on local formability

Sebastian Heibel Dr. Winfried Nester Dr. Till Clausmeyer Prof. Dr. Erman Tekkaya

P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.3: Session 3
Session starts at 14:45 Lecture
Black gold coatings fabricated using glancing angle deposition with substrate rotation by sputtering

Dr. Jose Miguel Garcia-Martin Dr. Maria Ujue Gonzalez Dr. Rafael Alvarez Dr. Alberto Palmero

S02: Experiments and Simulations Towards Understanding Tribology Across Length-Scales
S02.2: Third Body Formation
Session starts at 14:45 Lecture
The influence of heat treatment on the third body formation of AlSi9Cu3

Dr. Dominic Linsler Prof. Dr. Martin Dienwiebel

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.6: Micromechanics
Session starts at 14:45 Lecture
New insights into plasticity at grain boundaries by nano- and micromechanics

Dr. Christoph Kirchlechner

S08: Advanced Steels
S08.2: Stainless Steels
Session starts at 14:45 Lecture
Precipitation behavior and corrosion resistance of nickel-free, high-nitrogen austenitic stainless steels

Dipl.-Ing. Paul Rosemann Patricia Pensel Saskia Roßberg Christopher Müller Dr. Andreas Burkert

15:30
B06: Biomaterials for Bone Substitution and Regeneration
B06.3: Session 3
Session starts at 14:45 Lecture
Bioactive and biomimetic scaffolds to mimic healthy bone

Dipl.-Ing. Giorgia Montalbano Giulia Molino Dr. Gabriela Ciapetti Prof. Monica Mattioli Belmonte Prof. Giovanni Vozzi Prof. Sonia Fiorilli Prof. Chiara Vitale Brovarone

C02: Going 3D: From Image to Knowledge
C02.3: Session 3
Session starts at 14:45 Highlight Lecture
Mechanical properties of nanoporous gold studied by scale-bridging in situ testing, non-destructive 3D analyses and experimentally-informed simulations

Dipl.-Ing. Thomas Przybilla Erich Thiess Dr. Florian Niekiel Dr. Benjamin Apeleo Zubiri Dr. Mirza Mačković Peter Schweizer Zhuocheng Xie Dr. Julien Guénolé Dr. Arun Prakash Dr. Stephen T. Kelly Dr. Hrishikesh Bale Prof. Dr. Erik Bitzek Prof. Dr. Erdmann Spiecker

C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.1: Session 1
Session starts at 14:45 Lecture
Combined in situ heating and diffraction in Scanning Electron Microscopy

Peter Denninger Peter Schweizer Christian Dolle Prof. Dr. Erdmann Spiecker

C05: Small Scale and In Situ Mechanical Testing
C05.6: Interfaces
Session starts at 14:45 Lecture
Towards radiation tolerant materials: Evaluation of radiation effects in interface-rich, nanostructured Cu-Fe-Ag

Michael Wurmshuber David Frazer Dr. Andrea Bachmaier Prof. Dr. Peter Hosemann Prof. Dr. Daniel Kiener

F02: Surface Engineering and Functionalisation
F02.3: Corrosion and Wear Protection Control
Session starts at 14:45 Lecture
γ’-Fe4N variants on α-Fe substrates grown by gaseous nitriding

Dipl.-Ing. Helge Schumann Dr. Gunther Richter Prof. Dr. Andreas Leineweber

F06: Materials Design for Electrochemical Energy Storage
F06.3: Processing Aspects
Session starts at 14:45 Lecture
Thermal post-treatment of highly-filled electrically and thermally conductive polymers

Andre Kayser

F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.2: Segregation and Space Charge
Session starts at 14:45 Keynote Lecture
Tailored interface chemistry and orientation by solid state conversion towards piezotronic bicrystals

Prof. Dr. Jürgen Rödel Peter Keil Dr. Till Frömling Maximilian Trapp Prof. Dr. Hans-Joachim Kleebe Dr. Nikola Novak

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.3: Ceramic Materials
Session starts at 14:45 Lecture
Phase-field investigation on needle-like structures of aluminum carbide at the surface of carbon particles

Yuhan Cai Dr. Fei Wang Dr. Michael Selzer Dr. Anastasia August Prof. Dr. Britta Nestler

M07: Modeling and Process Simulation of Fiber-Reinforced Polymers
M07.1: Modeling FRP on Micro Scale
Session starts at 14:45 Lecture
Combined experimental-numerical fracture analysis of fiber reinforced composites

Michael Schober Dr. Jörg Hohe Dr. Takashi Kuboki

M08: Integrated Computational Materials Engineering (ICME)
M08.1: Description of Materials and Properties
Session starts at 14:45 Lecture
Elastic properties of alpha-phase in engineering aluminium alloys: an ab-initio study

Dr.-Ing. Duancheng Ma

P08: Damage in Metal Forming
P08.2: Session 2
Session starts at 14:45 Lecture
Damage characterization and modelling of a dual-phase steel during plastic deformation under different stress states, temperatures and strain rates

Wenqi Liu Dr. Junhe Lian Prof. Dr. Sebastian Münstermann

P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.3: Session 3
Session starts at 14:45 Lecture
Glancing angle deposition and characterization of AlN inclined nanostructures using reactive magnetron sputter epitaxy

Ph.D. Samiran Bairagi Dr. Fredrik Eriksson Prof. Jens Birch Prof. Kenneth Järrendahl Dr. Ching-Lien Hsiao

S02: Experiments and Simulations Towards Understanding Tribology Across Length-Scales
S02.2: Third Body Formation
Session starts at 14:45 Lecture
Effect of Different Surface Texturing Methods on the Tribological Performance of Ti6Al4V

Daniel Kümmel Marcus Hamann-Schroer Eric Segebade Dr. Johannes Schneider

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.6: Micromechanics
Session starts at 14:45 Lecture
Constant-stress miniaturized creep testing for single-phase, multi-phase and single crystalline nickel base high temperature alloys

LiKang Luan Dr. Heinz Riesch-Oppermann Prof. Dr. Martin Heilmaier

S08: Advanced Steels
S08.2: Stainless Steels
Session starts at 14:45 Lecture
Hot rolling simulation of metastable Fe-16Cr-4Mn-4Ni-0.05C-0.17N austenitic steel

Dipl.-Ing. Murodjon Turdimatov Alexander Nam Prof. Dr. Rudolf Kawalla Prof. Dr. Ulrich Prahl

15:45
B06: Biomaterials for Bone Substitution and Regeneration
B06.3: Session 3
Session starts at 14:45 Lecture
On-demand release of bone healing drugs from adhesive thermoresponsive polyelectrolyte complex particle coatings at bone substitute materials

Dr. Martin Müller David Vehlow Berthold Reis Birgit Urban Dr. Anna Luise Grab Prof. Dr. Katrin Susanne Lips

C02: Going 3D: From Image to Knowledge
C02.3: Session 3
Session starts at 14:45 Lecture
High Resolution X-ray Microscopy for Grain Mapping and 4D Studies in Materials Science

Dr. William Harris Dr. Hrishikesh Bale Dr. Steve Kelly Dr. Tobias Volkenandt Dr. Benjamin Hornberger

C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.1: Session 1
Session starts at 14:45 Keynote Lecture
Evaluation of radiation induced mechanical property changes in metals via micro scale mechanical testing

Prof. Peter Hosemann Hi Vo David Frazer Dr. Yun Yang Zhangjie Wang

C05: Small Scale and In Situ Mechanical Testing
C05.6: Interfaces
Session starts at 14:45 Lecture
Atomistic simulations of size effects in lamellar TiAl alloys

Dr. Rebecca Janisch Ashish Chauniyal

F02: Surface Engineering and Functionalisation
F02.3: Corrosion and Wear Protection Control
Session starts at 14:45 Keynote Lecture
Development of high-performance metallic coatings by laser-assisted low pressure cold spray process (LA-LPCS)

Dr.-Ing. Denise Beitelschmidt Dr. Filofteia Laura Toma Prof. Dr. Ralf-Eckhard Beyer

F06: Materials Design for Electrochemical Energy Storage
F06.3: Processing Aspects
Session starts at 14:45 Lecture
Predicting interface (in)stabilities for battery applications via analysis of defect thermodynamics from first-principles calculations

Marcel Sadowski Prof. Karsten Albe Dr. Sabrina Sicolo

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.3: Ceramic Materials
Session starts at 14:45 Lecture
The influence of anisotropic surface stresses and bulk stresses on defect thermodynamics in LiCoO2 nanoparticles

Dr.-Ing. Peter Stein Dr. Ashkan Moradabadi Manuel Diehm Prof. Dr. Bai-Xiang Xu Prof. Dr. Karsten Albe

M07: Modeling and Process Simulation of Fiber-Reinforced Polymers
M07.1: Modeling FRP on Micro Scale
Session starts at 14:45 Lecture
Simulation of a Multifunctional Hybrid Composite with Continuous Steel and Carbon Fiber Reinforcement on the micro-level

Dr.-Ing. Constantin Bauer Benedikt Hannemann Dr. Matthias Kabel Dr. Sebastian Schmeer

M08: Integrated Computational Materials Engineering (ICME)
M08.1: Description of Materials and Properties
Session starts at 14:45 Lecture
Prediction of interaction parameters for grain boundary segregation in binary alpha-iron based alloys

Prof. Dr. Pavel Lejcek Prof. Dr. Siegfried Hofmann

P08: Damage in Metal Forming
P08.2: Session 2
Session starts at 14:45 Lecture
Identification of GTN model parameters by macroscopic and microscopic approaches

Alexander Schowtjak Carl Kusche Dr. Till Clausmeyer Dr. Talal Al-Samman Prof. Dr. Sandra Korte-Kerzel

P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.3: Session 3
Session starts at 14:45 Lecture
Nanostructured Amorphous TaxWyOz Films by Magnetron Reactive Co-Sputtering with Oblique-Angle Deposition Towards Electrochromic Smart-Window Applications

Dr. Mati Horprathum Wantanee Hincheeranun Chanunthorn Chananonnawathorn Saksorn Limwichean Viyapol Patthanasettakul Dr. Kamon Aiempanakit Dr. Hideki Nakajima Dr. Annop Klamchuen Dr. Chomphunuch Songsiriritthigul Dr. Prayoon Songsiriritthigul Dr. Pitak Eiamchai

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.6: Micromechanics
Session starts at 14:45 Keynote Lecture
Mechanical Properties of Materials and Devices at the Microscale under Extreme Conditions of High and Low Temperatures and High Strain Rates

Dr. Johann Michler

S08: Advanced Steels
S08.2: Stainless Steels
Session starts at 14:45 Lecture
Model-compatible description of the temperature dependent strength of ferritic and austenitic ODS steels

Sascha Seils Frauke Hinrichs Dr. Torben Boll Dr. Alexander Kauffmann Prof. Dr. Martin Heilmaier

16:00
B06: Biomaterials for Bone Substitution and Regeneration
B06.3: Session 3
Session starts at 14:45 Lecture
Metastable beta-Ti-Nb alloys for load-bearing bone-implant applications

Dr. Annett Gebert Stefan Pilz Romy Schmidt Prof. Jens Freudenberger Prof. Martina Zimmermann Prof. Mariana Calin

C02: Going 3D: From Image to Knowledge
C02.3: Session 3
Session starts at 14:45 Lecture
High-precision Lithography-based Ceramic Manufacturing (LCM)

Julia Anna Schönherr Sonja Baumgartner Malte Hartmann Prof. Dr. Jürgen Stampfl

F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.2: Segregation and Space Charge
Session starts at 14:45 Lecture
Atomic and electronic structure of wurtzite ZnO(0001) inversion domain boundaries

Dr. Jochen Rohrer Prof. Dr. Karsten Albe

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.3: Ceramic Materials
Session starts at 14:45 Lecture
Electrochemical-thermodynamics of lithium batteries

Prof. Dr. Hans Jürgen Seifert Prof. Dr. Yong Du Dr. Weibin Zhang Dr. Dajian Li Dr. Damian Cupid Dr. Petronela Gotcu Prof. Dr. Keke Chang

M07: Modeling and Process Simulation of Fiber-Reinforced Polymers
M07.1: Modeling FRP on Micro Scale
Session starts at 14:45 Lecture
Fiber Interaction in Short Glass Fiber Reinforced Thermoplastics

Kevin Breuer Prof. Dr. Markus Stommel

M08: Integrated Computational Materials Engineering (ICME)
M08.1: Description of Materials and Properties
Session starts at 14:45 Oral Poster
Multiscale homogenization scheme for dissipative cohesive-frictional materials

Dipl.-Ing. Felipe Lopez Rivarola Prof. Dr. Guillermo Etse Prof. Dr. Paula Folino

P08: Damage in Metal Forming
P08.2: Session 2
Session starts at 14:45 Oral Poster
A computational framework for the simulation of regularised damage

Dr.-Ing. Richard Ostwald Prof. Dr. Ellen Kuhl Prof. Dr. Andreas Menzel

P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.3: Session 3
Session starts at 14:45 Lecture
Solid-state dewetting of Au coatings on GLAD thin films acting as a template

Dr. Manuel Oliva-Ramírez Dr. Dong Wang Dr. Víctor J. Rico Gavira Prof. Dr. Augustin R. González-Elipe Prof. Dr. Peter Schaaf

S02: Experiments and Simulations Towards Understanding Tribology Across Length-Scales
S02.2: Third Body Formation
Session starts at 14:45 Oral Poster
Copper oxide cluster formation under a reciprocating tribological load in high-purity copper

Julia Lehmann Zhilong Liu Dr. Christian Greiner Prof. Dr. Peter Gumbsch

S08: Advanced Steels
S08.2: Stainless Steels
Session starts at 14:45 Lecture
Age-hardening behaviour, microstructure and corrosion resistance of the copper alloyed stainless steel 1.4542

Norman Kauss Prof. Dr. Thorsten Halle Dr. Paul Rosemann

16:03
M08: Integrated Computational Materials Engineering (ICME)
M08.1: Description of Materials and Properties
Session starts at 14:45 Oral Poster
Simulation of the intercritical annealing of Dual-Phase steels

Dr. Helen Kamoutsi Prof. Dr. Gregory Haidemenopoulos Prof. Dr. Gregory Haidemenopoulos John Aristeidakis

P08: Damage in Metal Forming
P08.2: Session 2
Session starts at 14:45 Oral Poster
Fatigue behavior of 16MnCrS5 work piece material depending on metal forming induced damage and axial torsional fatigue loading sequence

Kerstin Moehring Kai Langenfeld Prof. Dr. Mosler Jörn Prof. Dr. Frank Walther

S02: Experiments and Simulations Towards Understanding Tribology Across Length-Scales
S02.2: Third Body Formation
Session starts at 14:45 Oral Poster
Evolution of friction anisotropy for repeated unidirectional tribological loading of high-purity copper

Christian Haug Prof. Dr. Peter Gumbsch Dr. Christian Greiner

16:06
M08: Integrated Computational Materials Engineering (ICME)
M08.1: Description of Materials and Properties
Session starts at 14:45 Oral Poster
Developing CVD Ti(C,N) hard-coating through ICME

Prof. Dr. Yong Du Dr. Qiu Lianchang Dr. Wang Shaoqing Du Liye Prof. Dr. Chen Zhuo Prof. Dr. Wang Jiong Dr. Zhong Zhiqiang Shi Haidong Dr. Albir Layyous

P08: Damage in Metal Forming
P08.2: Session 2
Session starts at 14:45 Oral Poster
Load path modelling in single-step deep drawing of rotationally symmetric cups

Matthias Nick Dr. Thomas Bergs Dr. Daniel Trauth

S02: Experiments and Simulations Towards Understanding Tribology Across Length-Scales
S02.2: Third Body Formation
Session starts at 14:45 Oral Poster
Tribolayer formation duration cyclic contact at the microscale

Dr. Steffen Brinckmann

16:09
P08: Damage in Metal Forming
P08.2: Session 2
Session starts at 14:45 Oral Poster
Microscale study of forming induced physical mechanisms in 16MnCrS5 steel

Anthony Dunlap Dr. Anke Aretz Dr. Alexander Schwedt Oliver Hering

S02: Experiments and Simulations Towards Understanding Tribology Across Length-Scales
S02.2: Third Body Formation
Session starts at 14:45 Oral Poster
Rolling contact-induced near-surface microstructural alteration in high nitrogen bearing steel

Yu Qin David Mayweg Prof. Dr. Dierk Raabe Dr. Michael Herbig

16:15
Y: Breaks Coffee Break
Coffee Break
16:45
B03: Degradation Mechanisms and Characterization of Biodegradable Materials
B03.1: Session 1
Session starts at 16:45 Lecture
Mechanical and corrosion properties of two precipitation hardened Mg-Y-Nd-Gd-Dy alloys with small changes in chemical composition

Prof. Dr. Petra Maier Nadine Lauth Maximilian Bechly Dr. Norbert Hort

C02: Going 3D: From Image to Knowledge
C02.4: Session 4
Session starts at 16:45 Keynote Lecture
Towards creating experimental data for atomistic simulation

Prof. Dr. Peter Felfer

C03: Tomographic and Radiographic Imaging with Synchrotron X-rays and Neutrons: Exploiting Contrast and Time
C03.1: X-ray Microtomography: Characterisation
Session starts at 16:45 Keynote Lecture
Characterization of metallic and non-metallic microstructures by X-ray micro- and nano-computed tomography – implications for new materials design and structure-function relations

Dr. Simon Zabler Maximilian Ullherr Dr. Christoph Schweizer Dr. Astrid Hölzing Dr. Christian Fella Prof. Dr. Randolf Hanke

C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.2: Session 2
Session starts at 16:45 Keynote Lecture
Towards a better understanding of void nucleation and growth during deformation through in situ multiscale correlative X-ray and electron microscopy

Prof. Philip Withers Dr. Yi Guo Dr. Timothy Burnett Prof. Andrew Sherry Dr. Kyono Yasuda Dr. Hirofumi Ohtsubo Dr. Kaoru Sato

F02: Surface Engineering and Functionalisation
F02.4: Sensors and Wetting Control
Session starts at 16:45 Keynote Lecture
Multifunctional Pressure Sensors for Eco-friendly Car Power-Train Management

Dr.-Ing. Markus Eberstein Dr. Christian Wohlgemuth Dr. Peter Saettler Alessandra Winkelmann Bert Hundertmark Manuel Lumpe Benjamin Bohl

F06: Materials Design for Electrochemical Energy Storage
F06.4: Transport Properties
Session starts at 16:45 Lecture
Diffusion mechanism in the superionic conductor Li4PS4I studied by first-principles calculations

Prof. Dr. Karsten Albe Dr. Sabrina Sicolo Constance Kalcher

F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.3: Structure and Thermodynamics
Session starts at 16:45 Highlight Lecture
Effect of solute segregation on the stability and evolution of microstructures

Prof. Dr. Reiner Kirchheim

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.4: Nickel-base Materials Systems
Session starts at 16:45 Lecture
Cellular solidification morphologies in SLM processed IN718: a phase-field study

Dr. Markus Apel Dr. Guillaume Boussinot Dr. Bernd Böttger

M07: Modeling and Process Simulation of Fiber-Reinforced Polymers
M07.2: Forming Simulation of Continuous FRP
Session starts at 16:45 Lecture
Multi-scale modeling approach for the process simulation of carbon fibers

Stefan Hesseler Lars Appel Dr. Scott Stapleton Prof. Dr. Thomas Gries

M08: Integrated Computational Materials Engineering (ICME)
M08.2: Alloy and Process Design
Session starts at 16:45 Highlight Lecture
Alloy design of medium Mn steels based on computational thermodynamics, kinetics and multi-objective optimization

Ph.D. John Aristeidakis Prof. Dr. Gregory Haidemenopoulos Prof. Dr. Gregory Haidemenopoulos

P06: Molecular Preparative Approaches to Functional Materials
P06.1: Sol-Gel-Based Functional Materials
Session starts at 16:45 Keynote Lecture
Lessons from the bench: from molecules to functional electronic devices

Prof. Dr. Jörg Schneider Shawn Sanctis Jan Krausmann Dr. Rudolf Hoffmann

P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.4: Session 4
Session starts at 16:45 Lecture
Enhanced photocatalytic activity of TiO2 nanocolumn arrays/dielectric/mirror structure

Prof. Kyoko Namura Ryosuke Kakuki Prof. Motofumi Suzuki

S02: Experiments and Simulations Towards Understanding Tribology Across Length-Scales
S02.3: Recent Trends in Tribology
Session starts at 16:45 Keynote Lecture
The importance of tribofilm formation for metal matrix composites

Prof. Richard Chromik

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.7: Special Session on Light Weight Metals
Session starts at 16:45 Highlight Lecture
Challenges and Solutions in the Development of Magnesium Sheets

Dr. Dietmar Letzig Dr. Sangbong Yi Dr. Jose Victoria-Hernandez Dr. Gerrit Kurz Dr. Jan Bohlen

S08: Advanced Steels
S08.3: Processing, Microstructure and Mechanical Properties
Session starts at 16:45 Keynote Lecture
Mechanical Properties of Carbide-free Bainitic High Silicon Cast Steels

Prof. Dr. Roberto Boeri Nicolás Tenaglia Dr. Alejandro Basso Prof. Dr. Juan Miguel Massone

17:00
B03: Degradation Mechanisms and Characterization of Biodegradable Materials
B03.1: Session 1
Session starts at 16:45 Lecture
Mechanism of tumor cell apoptosis mediated by a rare earth-containing magnesium alloy

Dr. Natalia Anisimova Natalia Martynenko Dr. Elena Lukyanova Prof. Dr. Mikhail Kiselevskiy Prof. Dr. Sergey Dobatkin Prof. Dr. Yuri Estrin

F06: Materials Design for Electrochemical Energy Storage
F06.4: Transport Properties
Session starts at 16:45 Lecture
Correlating conductivities of cathode materials on a macroscopic and microscopic scale: A study on NCM-111

Julian Zahnow Dr. Amalia C. Wagner Dr. Joachim R. Binder Dr. Matthias T. Elm Prof. Dr. Jürgen Janek

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.4: Nickel-base Materials Systems
Session starts at 16:45 Lecture
Simulation-aided MCrAlY lifetime assessment - A thermodynamic study on diffusion and oxidation based degradation of MCrAlY overlay systems used in stationary gas turbines

Dipl.-Ing. Max Thorhauer Prof. Dr. Christoph Leyens

M07: Modeling and Process Simulation of Fiber-Reinforced Polymers
M07.2: Forming Simulation of Continuous FRP
Session starts at 16:45 Keynote Lecture
Thermomechanical analysis of thermoforming processes of continuously fibre-reinforced semi-crystalline thermoplastics

Dominik Dörr Tobias Joppich Frank Henning Luise Kärger

M08: Integrated Computational Materials Engineering (ICME)
M08.2: Alloy and Process Design
Session starts at 16:45 Lecture
Analysis of a die design and extrusion process of uPVC profile: 3D modeling, simulation and experimental testings.

Prof. Carlos Tomassini Dr. Fernando Angiolini

P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.4: Session 4
Session starts at 16:45 Lecture
Applying oblique-incidence deposition to tailor magnetic properties of CoFeB in single thin films and TMR stacks

Svenja Willing Dr. Kai Schlage Dr. Tatiana Gurieva Prof. Dr. Ralf Röhlsberger

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.7: Special Session on Light Weight Metals
Session starts at 16:45 Lecture
Multi-directional forging and warm extrusion of AZ80 Mg alloy

Prof. Dr. Hiromi Miura Keiichiro Minami Dr. Tomoya Aoba Prof. Dr. Masakazu Kobayashi

17:15
B03: Degradation Mechanisms and Characterization of Biodegradable Materials
B03.1: Session 1
Session starts at 16:45 Lecture
Biocompatibility of magnesium alloys in vitro and in vivo: understanding the pitfalls

Prof. Dr. Mikhail Kiselevskiy Dr. Natalia Anisimova Natalia Martynenko Dr. Elena Lukyanova Prof. Dr. Sergey Dobatkin Prof. Dr. Yuri Estrin

C02: Going 3D: From Image to Knowledge
C02.4: Session 4
Session starts at 16:45 Lecture
Digital Twin - How to generate and validate modelled microstructures from 2D and 3D images

Dr.-Ing. Constantin Bauer Dr. Andreas Wiegmann Tim Schmidt Florian Schimmer Dr. Erik Glatt Dr. Matthias Kabel Andreas Griesser

C03: Tomographic and Radiographic Imaging with Synchrotron X-rays and Neutrons: Exploiting Contrast and Time
C03.1: X-ray Microtomography: Characterisation
Session starts at 16:45 Lecture
3d Tomography Analysis of the Packing Structure of spherical Particles in prismatic Containers

Prof. Dr. Jerome Vicente Prof. Dr. Joerg Reimann Dr. Claudio Ferrero Dr. Alexander Rack Prof. Dr. yixiang Gan

C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.2: Session 2
Session starts at 16:45 Lecture
X-ray tomography of metallic microparticles: a powerful tool for additive manufacturing and understanding structure-property relationships of funtional materials

Anja Waske Alexander Funk Bruno Weise

F02: Surface Engineering and Functionalisation
F02.4: Sensors and Wetting Control
Session starts at 16:45 Lecture
Fabrication of hydrophobic aluminium surfaces by using combined laser structuring technologies

Dipl.-Ing. Stephan Milles Prof. Dr. Andrés Fabián Lasagni

F06: Materials Design for Electrochemical Energy Storage
F06.4: Transport Properties
Session starts at 16:45 Lecture
Investigation of Charge Transport in NCM 111 Secondary Particles by Electrochemical Impedance Spectroscopy

Markus Sebastian Friedrich Dr. Amalia Wagner Dr. Joachim Binder Dr. Matthias T. Elm Prof. Dr. Peter J. Klar

F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.3: Structure and Thermodynamics
Session starts at 16:45 Highlight Lecture
Atomic scale observations of grain boundary phase transitions

Dr. Christian Liebscher Nicolas Peter Thorsten Meiners Dr. Timofey Frolov Prof. Dr. Gerhard Dehm

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.4: Nickel-base Materials Systems
Session starts at 16:45 Lecture
Thermodynamic Investigation of the Oxidation of NiAl-(Cr,Mo) Alloys Used for Manufacturing Metal Matrix Composites by Directional Solidification

Golnar Geramifard Dr. Peter Franke Prof. Dr. Hans Jürgen Seifert

M08: Integrated Computational Materials Engineering (ICME)
M08.2: Alloy and Process Design
Session starts at 16:45 Lecture
Thermomechanical modeling of the sintering process of ceramics

Daniel Kempen Prof. Andrea Piccolroaz

P06: Molecular Preparative Approaches to Functional Materials
P06.1: Sol-Gel-Based Functional Materials
Session starts at 16:45 Lecture
Design of specific molecules for the elaboration of highly hydrophilic hybrid sol-gel coatings

Agathe Bouvet-Marchand Camille Chatard Dr. Alain Graillot Dr. Cédric Loubat Prof. Dr. David Grosso

P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.4: Session 4
Session starts at 16:45 Lecture
Dye Giant Absorption and Light Confinement Effects in Porous Bragg Microcavities prepared by evaporation at oblique angles

Prof. Dr. Augustin R. González-Elipe Dr. Manuel Oliva-Ramirez Dr. Jorge Gil-Rostra Dr. Francisco Yubero

S02: Experiments and Simulations Towards Understanding Tribology Across Length-Scales
S02.3: Recent Trends in Tribology
Session starts at 16:45 Lecture
On the Tribology of Silicon-based Ceramics under Media Lubricated Reciprocating Sliding

Paul Schreiber Dr. Johannes Schneider

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.7: Special Session on Light Weight Metals
Session starts at 16:45 Lecture
Development of a new Al-Mg-Si HPDC alloys with Sc addition

Olena Prach Prof. Dr. Karsten Durst

S08: Advanced Steels
S08.3: Processing, Microstructure and Mechanical Properties
Session starts at 16:45 Lecture
Combined application of theory and experiment to the design of iron base alloys

Dr.-Ing. Pedro Ferreirós Abraham A. Becerra Dr. Paula R. Alonso Dr. Gerardo H. Rubiolo

17:30
B03: Degradation Mechanisms and Characterization of Biodegradable Materials
B03.1: Session 1
Session starts at 16:45 Lecture
Influence of the electrolyte composition on degradation of Mg-Ca-Zn alloys for oral and maxillofacial surgery applications

Veronika Chaineux Sebastian Ubber Naemi A. Zumdick Dr. Ali Modabber Dr. Evgeny Goloborodko Prof. Dr. Sabine Neuß-Stein Prof. Dr. Daniela Zander

C02: Going 3D: From Image to Knowledge
C02.4: Session 4
Session starts at 16:45 Lecture
Computerized Stereological Analysis in Abrasive Wear Applications

Dipl.-Ing. Santiago Manuel Benito Dr. Fabian Pöhl

C03: Tomographic and Radiographic Imaging with Synchrotron X-rays and Neutrons: Exploiting Contrast and Time
C03.1: X-ray Microtomography: Characterisation
Session starts at 16:45 Lecture
Comparison of ex situ x-ray tomography and in situ monitoring to gain control over defects during laser welding

Dipl.-Ing. Jean-Baptiste Forien Philip Depond Dr. Gabe Guss Bradley Jared Jonathan Madison Elena Garlea Hahn Choo Manyalibo Matthews

C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.2: Session 2
Session starts at 16:45 Lecture
Advanced characterization of microstructure, stress state and thermo-mechanical properties of nanostructured materials by in-situ synchrotron X-ray diffraction

Prof. Dr. Rostislav Daniel Michael Meindlhumer Stefan Klima Nikolaus Jäger Dr. Hynek Hruby Dr. Andreas Stark Dr. Manfred Burghammer Prof. Dr. Christian Mitterer Prof. Dr. Jozef Keckes

F02: Surface Engineering and Functionalisation
F02.4: Sensors and Wetting Control
Session starts at 16:45 Lecture
Tin oxide disproportionation on nanostructured silicon surfaces

Dr. Vladimir Sivakov Dr. Sergey Turishchev

F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.3: Structure and Thermodynamics
Session starts at 16:45 Lecture
Grain boundary phase transitions in the W–Ni alloys

Dr. Brigitte Baretzky Dr. Andrey Mazilkin Prof. Boris Straumal Dr. Svetlana Protasova Dr. Alexander Straumal

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.4: Nickel-base Materials Systems
Session starts at 16:45 Lecture
A high temperature creep model for Ni-based single crystal superalloys

Ph.D. Hao Yu Prof. Dr. Sybrand van der Zwaag Prof. Dr. Wei Xu

M07: Modeling and Process Simulation of Fiber-Reinforced Polymers
M07.2: Forming Simulation of Continuous FRP
Session starts at 16:45 Lecture
An approach for the layer-by-layer analysis of fiber orientation of continuously fiber-reinforced polymers based on orientation analyses of computer-tomographic (CT) scans

Ludwig Schöttl Dominik Dörr Pascal Pinter Tobias Joppich Frank Henning Luise Kärger

M08: Integrated Computational Materials Engineering (ICME)
M08.2: Alloy and Process Design
Session starts at 16:45 Lecture
Identification of the Optimum Processing Routes of Nb Microalloyed Steels using an Integrated Process Chain Model: Phase Field and Physically Based Models

Ph.D. Maria-Ioanna Tzini Prof. Dr. Gregory Haidemenopoulos

P06: Molecular Preparative Approaches to Functional Materials
P06.1: Sol-Gel-Based Functional Materials
Session starts at 16:45 Highlight Lecture
Photocatalysis in precursor derived white and black zirconia: Is it controlled by defect chemistry or crystal structure?

Prof. Dr. Ravi Kumar Nelamane Vijayakumar

P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.4: Session 4
Session starts at 16:45 Lecture
Hydrophilic ultra-thin porous films for color variation with humidity by using oblique angle deposition

Young Jin Yoo Prof. Young Min Song

S02: Experiments and Simulations Towards Understanding Tribology Across Length-Scales
S02.3: Recent Trends in Tribology
Session starts at 16:45 Highlight Lecture
Variations in cavitation bubble dynamics and their effects on the resulting surface indentations on commercially pure Aluminium

Dr. Stefanie Hanke Hemant J. Sagar Chaojie Feng Martin Underberg Prof. Ould el Moctar Prof. Sebastian A. Kaiser

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.7: Special Session on Light Weight Metals
Session starts at 16:45 Lecture
Manufacturing of seamless tubes of the alloy Al-5Mg-0,2Sc by direct extrusion and sink drawing

Dr. Oleksandr Golovko Prof. Dr. Yaroslav Frolov Dr. Vitalii Andreiev Dr. Christian Klose Dr. Florian Nürnberger

S08: Advanced Steels
S08.3: Processing, Microstructure and Mechanical Properties
Session starts at 16:45 Lecture
Additive Manufacturing of Advanced High-Strength Steels

Dr.-Ing. Christian Haase Fabian Kies Patrick Köhnen Dr. Andreas Weisheit Prof. Dr. Johannes Henrich Schleifenbaum

17:45
Y: Breaks Time to change the room
Time to change the room
18:00
B03: Degradation Mechanisms and Characterization of Biodegradable Materials
B03.2: Session 2
Session starts at 18:00 Lecture
Macrophage-mediated degradation of poly-trimethylenecarbonate is primarily achieved in their M2 mode

Dr. Theo van Kooten

C02: Going 3D: From Image to Knowledge
C02.5: Session 5
Session starts at 18:00 Keynote Lecture
Adaptive Scanning in Electron Microscopy

Dr.-Ing. Tim Dahmen Christoph Pauly Michael Engstler Prof. Dr. Niels de Jonge Prof. Dr. Frank Mücklich

C03: Tomographic and Radiographic Imaging with Synchrotron X-rays and Neutrons: Exploiting Contrast and Time
C03.2: Characterisation of Composites and Intermetallics Using Synchrotron Imaging
Session starts at 18:00 Keynote Lecture
Effect of processing parameters on the reaction kinetics of Fe-Al intermetallics studied by combined in-situ synchrotron radiography and diffraction

Dr.-Ing. Federico Sket Dr. Soundes Djaziri Dr. Anna Hynowska Dr. Srdjan Milenkovic

C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.3: Session 3
Session starts at 18:00 Keynote Lecture
Multi-modal and multi-length scale imaging of hierarchical biological materials - bioinspiration, microscopy, and correlative imaging

Dr. Richard Johnston Dr. Cameron Pleydell-Pearce Dr. Ria Mitchell Laura North Dr. Mark Coleman Peter Davies Dr. David Labonte Dr. Michelle Oyen Rachel Board Imogen Woodhead

F02: Surface Engineering and Functionalisation
F02.5: Bioresponse to Functionalized Surfaces
Session starts at 18:00 Lecture
Last developments on Direct Laser Interference Patterning of Polymers with sub-micrometer resolution: strategies and applications

Prof. Dr.-Ing. Andrés Fabián Lasagni Florian Rößler Sabri Alamri

F06: Materials Design for Electrochemical Energy Storage
F06.5: New Chemistries
Session starts at 18:00 Lecture
Molecular Precursor Approach to Lithium-vanadate Nanorods as Anode Materials for Lithium Ion Batteries

Olusola Ojelere David Graf Prof. Dr. Sanjay Mathur

F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.4: Properties of Interfaces
Session starts at 18:00 Highlight Lecture
In-Situ TEM Study of Electrochemical Lithiation of Lithium Manganese Oxide

Prof. Dr. Cynthia A. Volkert Torben Erichsen Dr. Vladimir Roddatis

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.5: Advanced Experimental and Modeling Techniques
Session starts at 18:00 Lecture
Containerless processing in the study of undercooled melts: on Earth and in Space

Prof. Dr. Dieter M. Herlach

M04: Predicting Interface Structure and Dynamics – From Atomic- to Meso-Scale
M04.1: Phase Interfaces
Session starts at 18:00 Highlight Lecture
From high throughput calculations to multiphase evolution in high entropy alloys

Dr. James Morris Dr. L. J. Santodonato Dr. M. C. Troparevsky Dr. R. R. Unocic Prof. P. K. Liaw

M07: Modeling and Process Simulation of Fiber-Reinforced Polymers
M07.3: Continuous Simulation of FRP along a CAE Chain
Session starts at 18:00 Keynote Lecture
In-situ structural assessment during composite layup and curing

Dr. Tobias Wille Falk Heinecke Robert Hein Martin Liebisch

M08: Integrated Computational Materials Engineering (ICME)
M08.3: Microstructure and Process Simulation
Session starts at 18:00 Highlight Lecture
Phase field modeling of precipitation microstructure evolution during heat treatment of Ni-base superalloys

Felix Schleifer Markus Holzinger Yueh-Yu Lin Dr. Michael Fleck Prof. Dr. Uwe Glatzel

P06: Molecular Preparative Approaches to Functional Materials
P06.2: Precursors for Optical and Opto-Electronic Materials
Session starts at 18:00 Keynote Lecture
The different facets of coinage metal coordination chemistry for opto-electronic materials

Dr. Andreas Orthaber Dr. Arvind K. Gupta Muhammad Anwar Shameem

P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.5: Session 5
Session starts at 18:00 Keynote Lecture
Oblique angle deposition of TiN thin films: Multi-Scale Investigation coupling kMC Simulations and Experiments towards a deeper understanding of the influence of growth parameters on the resulting microstructure.

Dr. Cedric Mastail Rubenson Mareus Dr. Boudjemaa Bouaouina Dr. Florin Nita Dr. Aurélien Besnard Dr. Anny Michel Prof. Dr. Grégory Abadias

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.8: Special Session on Light Weight Metals
Session starts at 18:00 Lecture
Segregation driven grain boundary precipitation in a model Al-Zn-Mg-Cu alloy

Huan Zhao Dr. Dirk Ponge Dr. Baptiste Gault Dr. Frédéric De Geuser Prof. Dierk Raabe

S08: Advanced Steels
S08.4: Processing, Microstructure and Mechanical Properties II
Session starts at 18:00 Lecture
Effects of Ti additions on tempering response of low carbon steels for Oil and Gas applications

Ph.D. Martin Valdez Dr. Gonzalo Gomez Mariano Coloschi

18:15
B03: Degradation Mechanisms and Characterization of Biodegradable Materials
B03.2: Session 2
Session starts at 18:00 Lecture
Strengthening and corrosion properties of a biodegradable Mg-Zn-Ca alloy ZX50 after processing by HPT and heat treatment

Andrea Ojdanic Prof. Dr. Erhard Schafler Dr. Jelena Horky Dr. Bernhard Mingler Prof. Dr. Dmytro Orlov Prof. Dr. Michael Zehetbauer

F02: Surface Engineering and Functionalisation
F02.5: Bioresponse to Functionalized Surfaces
Session starts at 18:00 Lecture
Reliability of Laser Patterned dental zirconia

Dr. Emilio Jimenez-Pique Dr. Erica Roitero Prof. Dr. Marc Anglada Prof. Dr. Frank Mücklich

F06: Materials Design for Electrochemical Energy Storage
F06.5: New Chemistries
Session starts at 18:00 Lecture
New tunnel-type materials TiNb2O7 and VNb9O25 for hybrid Mg,Li-ion batteries

Sebastian Maletti Dr. Daria Mikhailova Dr. Lars Giebeler

F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.4: Properties of Interfaces
Session starts at 18:00 Lecture
Fast grain-boundary diffusion in oxides: core transport versus space- charge layer transport

Jana P. Parras Prof. Dr. Roger A. De Souza

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.5: Advanced Experimental and Modeling Techniques
Session starts at 18:00 Lecture
An Advanced Knudsen Effusion Mass Spectrometer (KEMS) to measure vapor pressures and basic thermodynamic data - Preliminary studies for experiments at the International Space Station (ISS) -

Dr. David Henriques Maximilian Länge Prof. Dr. Torsten Markus

M04: Predicting Interface Structure and Dynamics – From Atomic- to Meso-Scale
M04.1: Phase Interfaces
Session starts at 18:00 Lecture
Interface design for transition metal carbide and nitride precipitates in ferritic and austenitic steels: first-principles approach

Dr. Oleg Kontsevoi Prof. Gregory Olson

M08: Integrated Computational Materials Engineering (ICME)
M08.3: Microstructure and Process Simulation
Session starts at 18:00 Lecture
Integrated modeling of the heat treatment of low-alloy TRIP steels

Dr. Helen Kamoutsi Konstantinos Psyridis Ioannis Kalamvokas Prof. Dr. Gregory Haidemenopoulos Prof. Dr. Gregory Haidemenopoulos

S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.8: Special Session on Light Weight Metals
Session starts at 18:00 Lecture
Influence of cooling rate and Mn/Fe-ratio on solidification path in a secondary Al7Si-alloy with focus on structural differences of the β- and δ-phase

Hanka Becker Prof. Andreas Leineweber Prof. Yanjun Li

S08: Advanced Steels
S08.4: Processing, Microstructure and Mechanical Properties II
Session starts at 18:00 Lecture
On phase transformations of high-alloy CrMnNi steels at high pressures up to 20 GPa

Dr.-Ing. Anja Weidner Prof. Horst Biermann Carl Wolf Robert Lehnert Dr. Sebastian Henkel Dr. Stefan Martin Dr. Christian Schimpf Prof. David Rafaja Dr. Marcus R. Schwarz Dr. Christian Lathe Dr. Robert Farla

18:30
B03: Degradation Mechanisms and Characterization of Biodegradable Materials
B03.2: Session 2
Session starts at 18:00 Lecture
Microstructure-property correlation of extruded Mg2GdxAg alloys

Dr. Norbert Hort Alex Kaine Dr. Jan Bohlen Dr. Björn Wiese Dr. Frank Feyerabend Yiyi Lu Prof. Dr. Karl Ulrich Kainer

C02: Going 3D: From Image to Knowledge
C02.5: Session 5
Session starts at 18:00 Lecture
Reconstruction of porous structures from FIB-SEM: influence of image resolution

Diego Roldan Michael Godehardt Sören Höhn Claudia Redenbach Dr. Katja Schladitz

C03: Tomographic and Radiographic Imaging with Synchrotron X-rays and Neutrons: Exploiting Contrast and Time
C03.2: Characterisation of Composites and Intermetallics Using Synchrotron Imaging
Session starts at 18:00 Lecture
3D printing material filled with metal organic frameworks analyzed by synchrotron based absorption edge tomography

Dr. Christian Gollwitzer Philipp Scholz Dr. Steffen Weidner

C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.3: Session 3
Session starts at 18:00 Lecture
In situ mechanical testing of Ag nanowire electrodes in complete organic solar cells using electron and X-ray microscopy

Nadine Schrenker Peter Schweizer Mirza Mačković George D. Spyropoulos Nikolas Karpstein Janis Wirth Silvan Englisch Manuela Göbelt Marco Moninger Prof. Dr. Silke Christiansen Prof. Dr. Christoph J. Brabec Prof. Dr. Erdmann Spiecker

F02: Surface Engineering and Functionalisation
F02.5: Bioresponse to Functionalized Surfaces
Session starts at 18:00 Lecture
Formation of nanoassembly via link chemistry for potential biomedical plasmonic application

Alexander Renner Markus Schütz Khan Lê Dr. Shaista Ilyas Nighat Ullah Dr. Anna Jurewicz Dr. Thomas Fischer Prof. Dr. Sanjay Mathur

F06: Materials Design for Electrochemical Energy Storage
F06.5: New Chemistries
Session starts at 18:00 Lecture
Insight into phase transformations in two layered NaxCo0.5Ti0.5O2 materials upon sodium extraction and insertion

Dr. Daria Mikhailova Sebastian Maletti Dr. Steffen Oswald Dr. Lars Giebeler

F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.4: Properties of Interfaces
Session starts at 18:00 Highlight Lecture
In-plane ferroelectricity in highly textured BaTiO3 thin films

Prof. Tor Grande Trygve Ræder Kristine Bakken Prof. Mari-Ann Einarsrud Dr. Anders Blichfeld Dr. Julia Glaum

M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.5: Advanced Experimental and Modeling Techniques
Session starts at 18:00 Lecture
A stepwise thermodynamic modeling of the phase diagram for the Cu-Be system

Ph.D. Yuling Liu Prof. Dr. Bo Sundman Prof. Dr. Yong Du Dr. Wang Jiong Prof. Dr. Liu Shuhong Prof. Dr. Gong WeiPing Dr. Zhang Cong

M04: Predicting Interface Structure and Dynamics – From Atomic- to Meso-Scale
M04.1: Phase Interfaces